|
| |
Back
Application of Bernoulli’s Equation to a Venturi | Up
Thermodynamics Heat Transfer and Fluid Flow Volume 3 of 3 | Next
HEAD LOSS |
BERNOULLI’S EQUATION
Fluid Flow
Summary
The main points of this chapter are summarized below.
Bernoulli’s Equation Summary
Bernoulli’s equation is an application of the First Law of Thermodynamics.
Bernoulli’s equation is an application of the general energy equation to a steady
flow system in which no work is done on or by the fluid, no heat is transferred
to or from the fluid, and no change occurs in the internal energy of the fluid.
Head is the term used to describe pressure exerted on or by a fluid.
As fluid flows in a piping system, changes in elevation, velocity, and pressure
heads must be consistent so that Bernoulli’s equation is satisfied.
Bernoulli’s equation can be modified to take into account friction losses and
pump work.
A venturi can be used to determine mass flow rates due to changes in pressure
and fluid velocity.
The volumetric flow rate through a venturi is directly proportional to the square
root of the differential pressure between the venturi’s inlet and its throat.
HT-03
Page 30
Rev. 0
|
