Removal and Replacement of Dc-to-Ac Inverter on Receiver Mount

removed from the connector on the re-

3-14. Removal and Replacement of Dc-to-Ac

ceivcr mount.

Inverter on Receiver Mount

b. Replacement.

Caution: Before removing receiver, discon-

(1) Place the dc-to-ac inverter in the receiver

nect aircraft dc power connected from direction

mount, making certain the potentiometer

finder set.

side is up and the dc-to-ac inverter con-

a. Removal.

nector mates perfectly with its mating con-

(1) Remove the receiver (para 3-13a).

nector on the receiver mount.

(2) Remove the two screws that hold dc-to-ac

Caution: The connectors may be dam-

inverter to receiver mount.

aged if not properly aligned.

(2) Carefully tighten the two screws that hold

(3) Grasp top and bottom of dc-to-ac inverter

dc-to-ac inverter to receiver mount.

and pull forward from receiver mount. It

Note. Do not adjust the potentiometer.

may be necessary to rock the dc-to-ac in-

(3) Replace the receiver (para 3-13b).

verter gently back and forth as it is being