Operator Preventive Maintenance Checks and Services-continued.

TM 9-6115-668-13 Item Location No. Interval Item to Check/Service Procedure ENGINE COMPARTMFNT - continued 43. Before Air flap 44. Before Air flap puller magnet MENT GENERATOR COMPART- 45. Before Fuel Fill Hose 46. Before Battery Set 47. Before Air cooling inlet grate 48. 19. During Front panel door During Control cabinet assembly Table 24 Operator Preventive Maintenance Checks and Services-continued. Check that air flap moves easily Air flap does not mow and closes automatically. smoothly. Check that cable is firmly at tached to air flap puller magnet and is undamaged. Check label. ing of J104. Check that hose is firmly at- tached to fuel tank and fuel filler neck. Check hose clamps. Check that batteries and connec- Batteries or connec- tors are secure. tors are missing. Inspect air coling inlet grate for Air cooling inlet grate looseness, damage, or dirt. is clogged. High voltage is produced when this Generator Set 150kW is in operation could re sult in personal injury or death. Check condition and operation of Front panel door can- front panel door. not be opened. a. Check all indicators and Indicators or controls controls for damaged or are damaged or miss- missing parts. ing. b. Check that designation plates are firmly attached and readable. c. Check that all lamps and in- dicators operate properly. Not Fully Mission Capable if: Cable is loose or dam, aged. Cracked hose, broken clamps or fuel leak. Change 1 2-27