|
| |
Back
Operator Preventive Maintenance Checks and Services for AN/MJQ-40, PU-803, and PU-804 - continued | Up
TM-9-6115-662-13P Power Unit Diesel Engine Driven 1 Ton Trailer Mounted 5 Kw 60 Hz PU-797 Manual | Next
Operator Preventive Maintenance Checks and Services for AN/MJQ-40, PU-803, and PU-804 - continued |
TM 9-6115-662-13&P
Item
No.
43
44
45
46
47
48
49
Interval
After
After
After
Table 2-2. Operator Preventive Maintenance Checks and Services
for AN/MJQ-40, PU-803, and PU-804 (continued)
Location
Item to Check/Service
GENERATOR SET -
Continued
HOUSING
IDENTIFICATION PLATES
SKID BASE
Not Fully Mission
Procedure
Capable if:
a.
b.
Check doors, panels, hinges,
and latches for damage, loose,
or corroded items.
Inspect air intake and exhaust
grills for debris.
Check to be sure identification
plates are secure.
Inspect skid base for cracks and
corrosion.
WARNING
Cannot secure doors.
Intake and exhaust
grills plugged.
I
Skid base cracked or
I
shows signs of
structural damage.
After
After
After
After
DO NOT smoke or use open flame near this generator set. The fuels used in it
are highly explosive. Flames and explosion can occur, resulting in severe
personal injury or death.
ENGINE ASSEMBLY
FUEL SYSTEM
FUEL FILTER/WATER
SEPARATOR
LUBRICATION SYSTEM
Check for loose, damaged, or
missing hardware.
Inspect fuel system for leaks,
damaged, loose, or missing
hardware.
a.
b.
a.
b.
c.
Inspect fuel filter/water
separator for leaks, cracks,
damage, proper mounting, or
missing parts.
Drain water from fuel
filter/water separator.
Inspect lubrication system for
leaks, damaged, loose, or
missing parts.
Check oil level.
Check engine oil for
contamination.
Any fuel leaks,
damaged, loose, or
missing parts.
Any fuel leaks.
Class III leaks,
damaged, loose, or
missing parts.
Oil level is below
ADD level.
Engine oil shows
contamination.
2-26
|
