TM-9-6115-658-13P0001.gif
TM-9-6115-658-13P0002.gif
TM-9-6115-658-13P0003.gif
TM-9-6115-658-13P0004.gif
TM-9-6115-658-13P0005.gif

Tm-9-6115-660-13p

• Section I. General Information
• Figure 1-2. Features Of Pu-798 And Pu-799.
• Table 1-1. Nomenclature Cross-Reference List
• Section Ii. Equipment Description
• Figure 1-3. Location Of Major Components, An/Mjq- 37 And An/Mjq-38.
• Table 1-2. Description Of Major Components, An/Mjq-7 And An/Mjq-38
• Table 1-3. Description Of Major Components, Pu-798, Pu-798a, Pu-799 And Pu-799a
• Section Iii. Principles Of Operation
• Chapter 2 Operating Instructions
• Section I. Description And Use Of Operator Controls And Indicators
• Table 2-1. Description Of Switch Box Controls And Lndicators
• Section Ii. Operator Preventive Maintenance Checks And Services
• 2-2.4.3 Routine Inspections
• 2-2.6 Operation Of Power Plant/Power Unit With Minor Leaks.
• Figure 2-2. Power Plant Operator Pmcs Routing Diagram (Typical).
• Figure 2-3. Power Unit Operator Pmcs Routing Diagram (Pu-798 And Pu-799).
• Figure 2-3. 1. Power Unit Operator Pmcs Routing Diagram (Pu-798a And Pu-799a).
• Table 2-2. Operator Preventive Maintenance Checks And Services
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Section Iii. Operation Under Usual Conditions
• 2-3.2.2 External Fuel Line Connection
• 2-3.3 Grounding Of Generator Set
• The Terminal Lug
• Figure 2-7. Power Plant And Power Unit Ground Connections.
• 2-3.4 Connecting Load.
• Figure 2-8. Switch Box Load Cable Connections.
• 2-4 Initial Adjustments, Checks, And Self Test.
• 2-5.3.2 Load Transfer.
• 2-5.3.3 Stopping Generator Set.
• 2-6 Identification And Information Plates.
• Figure 2-12. Pu-798 Identification/Transportation Data Plate.
• 2-6.5 Power Plant Instruction Plate
• Figure 2-14. 1. Pu-798a Shipping Data/Identification Plate.
• Figure 2-14.3. Pu-798a And Pu-799a Trailer Chassis Identification Plate.
• 2-7 Preparation For Movement.
• D. Remove Slide Hammer Components
• Figure 2-15. Remove Ground Rod.
• Figure 2-16. Disconnect Auxiliary Fuel (Typical).
• Section Iv. Operation Under Unusual Conditions
• Chapter 3 Operator Maintenance
• Section I. Operator Lubrication
• Section Ii. Troubleshooting
• Figure 3-1. On Indicator Lamp Fails To Light With Generator Set Running.
• Figure 3-2. On-Line Indicator Light Lamp Fails To Light When On/Off Switch Is Placed In On Position.
• Figure 3-3. Synchronizing Indicator Lamps Fail To Light When Transfer Switch Is Operated
• Figure 3-4. With All Indicator Lamps Working Properly, Load Will Not Transfer.
• Figure 3-5. Synchronizing Lndicator Lamps Fail To Operate Ln Unison When Transfer Switch Is Operated
• Section Iii. Maintenance Procedures
• Chapter 4 Unit Maintenance
• Section Vii
• Section I. Repair Parts; Special Tools; Test, Measurement, And Diagnostic Equipment (Tmde); And Support Equipment
• Section Ii. Service Upon Receipt
• 4-5 Installation Instructions
• 4-5.2.3 Assembly Of Power Units.
• 4-6 Preliminary Servicing And Adjustment Of Equipment.
• Figure 4-2. Installation Of Ground Wire.
• Section Iii. Unit Lubrication
• Section Iv. Unit Preventive Maintenance Checks And Services
• Figure 4-4. Unit Pmcs Routing Diagram.
• Table 4-1. Unit Preventive Maintenance Checks And Services
• Section V. Troubleshooting
• Figure 4-5. On Lndicator Lamp Serviceable But Fails To Light With Generator Set Running
• Figure 4-6. On-Line Indicator Lamp Serviceable But Fails To Light When On/Off Switch Is Placed In On Position.
• Figure 4-7. Synchronizing Indicator Lamps Fail To Light When Transfer Switch Is Operated
• Figure 4-8. No Power To Load With On-Line Indicator Lamp On.
• Figure 4-9. All Indicator Lamps Working Properly But Load Will Not Transfer.
• Section Vi. Maintenance Procedures.
• Figure 4-10. Power Cable Connections To Switch Box Contactors
• Figure 4-11. Disconnect Power Cable From Generator Set.
• Figure 4-12. Disconnect Power Cable From Switch Box Terminals.
• Installation
• 2. Insert Terminal Lug
• 4-13 Switch Box Maintenance
• Figure 4-13. Switch Box Repair.
• Installation
• 4-14 Indicator Light Assembly Maintenance.
• Table 4-2. Indicator Light Assembly Test Points
• 4-15 Synchronizing Light Maintenance
• Test
• 4-16 Toggle Switch Maintenance.
• Figure 4-16. Toggle Switch
• 4-17 Switch Box Load Terminal Maintenance
• Figure 4-17. Switch Box Load Terminal Maintenance (Sheet 1 Of 2).
• Figure 4-17. Switch Box Load Terminal Maintenance (Sheet 2).
• 4-18 Load Terminal Cover Maintenance.
• Figure 4-18. Loud Terminal Cover.
• 4-19 Accessory Box Maintenance.
• Figure 4-20. Repair Accessory Box.
• 4-20 Fire Extinguisher Bracket Maintenance
• 4-21 Trailer Lifting Ring Maintenance
• 4-22 Data Plate And Reflector Maintenance.
• Figure 4-22. Identification/Transport On Data Plate And Reflector Replacement.
• 4-23 An/Mjq-37, Animjq-38, Pu-798, And Pu-799 Trailer Platform Maintenance.
• 4-24 Pu-789 And Pu-799 Fender Maintenance.
• Figure 4-24. Pu-798 And Pu-799 Fender Replacement.
• Installation
• 4-25 An/Mjq-37 And An/Mjq-38 Fender Maintenance.
• Figure 4-25. An/Mjq-37 And An/Mjq-38 Fender Replacement.
• Installation
• 4-26 1 Ton Trailer Rear Leveling-Support Jack Maintenance
• Figure 4-26. Rear Leveling-Support Jack Replacement; 1 Ton Trailer.
• Figure 4-27. Rear Leveling-Support Jack Repair; 1 Ton Trailer.
• Figure 4-28. Pu-798a And Pu-799a Ground Stud Replacement.
• Section Vii. Administrative Storage
• Section Iv. Operation Under Unusual Conditions
• Section I. Operator Lubrication
• Section Ii. Troubleshooting
• Chapter 5 Direct Support Maintenance Instructions
• Section I. Repair Parts; Special Tools; Test, Measurement, And Diagnostic Equipment (Tmde); And Support Equipment
• Section Ii. Troubleshooting
• Figure 5-1. On Indicator Lamp Assembly Tests Good, But On Indicator Lamp Fails To Light With Generator Set Running.
• Figure 5-2. On-Line Indicator Lamp Assembly And On/Off Switch Serviceable, But On-Line Indicator Lamp Fails To Light When On/Off Switch Is Placed In On Position.
• Figure 5-3. Synchronizlnging Lndicator Lamps And Transfer Switch Serviceable, But Synchronlzlng Indicator Lamps Fail To Lamps Fail To Light When Transfer Switch Is Closed And Then Released
• Figure 5-4. All Indicator Lamps Working Property, But Load Will Not Transfer.
• Section Iii. Maintenance Procedures
• Figure 5-5. Power/Load Cable Removal.
• Figure -6. Removing Generator Set Mounting Hardware.
• Installation
• Figure 5-7. Switch Box Components.
• 5-7 Electrical Leads W3 - W8 Maintenance
• Figure 5-8. Switch Box Lead Connections.
• 5-8 Switch Box Harness W9 Maintenance
• Figure 5-9. Switch Box Relay Board Assembly
• Table 5-1. Switch Box Harness Wire List
• Figure 5-10. Disconnet Swifch Box Harness W9 From Contactor.
• Figure 5-11. Switch Box Load Terminals.
• Installation
• 5-9 Relay Board Harness W11 Maintenance.
• Figure 5-13. Relay Board Harness Assembly W11 Removal.
• 5-10 Output Connector Harness W10 Maintenance.
• Table 5-3. Output Connector Harness Continuity Check
• Figure 5-14. Output Connector Harness.
• 5-11 Relays K3-K6 Maintenance
• Test
• 5-12 Permissive Paralleling Relay Maintenance.
• Removal
• 5-13 Contactors K1 And K2 Maintenance.
• Figure 5-18. Replace Contactor.
• Table 5-5. Contactor Operation
• 5-14 Resistors R1-R3 Maintenance
• Figure 5-19. Resistors, Capacitors, And Diodes.
• 5-15 Capacitors C1-C4 Maintenance.
• 5-16 Diodes Cr1-Cr4 Maintenance.
• 5-16.1 Pu-798a And Pu-799a Floor And Fender Maintenance
• Figure 5-20. Pu-798a And Pu-799a Floor Replacement.
• Figure 5-21. Pu-798a And Pu-799a Fender Replacement.
• 5-17 An/Mjq-37, An/Mjq-38, Pu-798, And Pu-799 Trailer Fender Repair.
• Figure 5-22. Replace An/Miq-37 And An/Imjq-38 Generator Mounting Rails.
• 5-19 Pu-798 And Pu-799 Generator Mounting Rail Maintenance
• 5-20 Pu-798a And Pu-799a Generator Mounting Rail Maintenance
• Figure 5-24. Pu-798a And Pu-799a Generator Mounting Rail Replacement.
• 5-21 High Mobility Trailer Rear Leveling-Support Jack Maintenance.
• Figure 5-25. Rear Leveling-Support Jack Replacement; High Mobility Trailer
• Appendix A References
• A-7 Military Standards
• A-9 Lubrication Orders
• Appendix B Maintenance Allocation Chart
• B-3 Explanation Of Columns In The Mac
• B-4 Explanation Of Columns In Tool And Test Equipment Requirements
• Section Ii. Maintenance Allocation Chart
• Maintenance Allocation Chart (Continued)
• Section Iii. Tool And Test Equipment Requirements
• Section Iv. Remarks
• Appendix C Components Of End Item (Coei) And Basic Issue Items (Bll) Lists
• Section Ii. Components Of End Item
• Section Iii. Basic Issue Items
• Appendix D Additional Authorization Ust
• Appendix E Expendable And Durable Items List
• Section Ii. Expendable And Durable Items List
• Appendix F Unit And Direct Support Maintenance Repair Parts And Special Tools List
• F-3.2 Smr Code
• F-3.2.2 Maintenance Code
• F-3.2.3 Recoverability Code.
• F-4 Explanation Of Columns
• F-5 Special Information
• F-6 How To Locate Repair Parts
• Figure F-1. Generator Set Installation
• Description And Usable On Code
• Figure F-1. Generator Set Installation.
• Description And Usable On Code
• Figure F-3. Power Cables
• Description And Usable On Code
• Figure F-4. Cable Assembly
• Description And Usable On Codes
• Figure F-5. Switch Box Installation
• Description And Usable On Codes
• Figure F-6. Relay Board Harness Assembly (Sheet 1 Of 2)
• F-6 Wire Parts List (Sheet 2 Of 2)
• Description And Usable On Codes
• Description And Usable On Codes
• Figure F-7. Permissive Paralleling Relay
• Description And Usable On Codes
• Figure F-8. Indicator Lights
• Description And Usable On Codes
• Figure F-9. Light Assembly
• Description And Usable On Code
• Figure F-10. Switches
• Description And Usable On Codes
• Figure F-11. Load Terminal Cover
• Description And Usable On Codes
• Figure F-12. Load Terminal
• Description And Usable On Codes
• Figure F-13. Electrical Leads
• Description And Usable On Codes
• Description And Usable On Codes
• Figure F-14. Output Connector Harness Assembly
• Description And Usable On Codes
• Figure F-15. Switch Box Harness Assembly (Sheet 1 Of 2)
• Figure F-15. Switch Box Harness Assembly (Sheet 2 Of 2)
• Description And Usable On Codes
• Figure F-16. Contactor
• Description And Usable On Codes
• Figure F-17. Resistor R3
• Description And Usable On Codes
• Figure F-18. Switch Box Assembly
• Description And Usable On Codes
• Figure F-19. Accessories.
• Description And Usable On Code
• Figure F-20. Accessory Box.
• Description And Usable On Code
• Figure F-21. Power Plant Fire Extinguisher, Oil Drain And Ground Wire
• Description And Usable On Codes
• Figure F-22. Power Unit Fire Extinguisher, Oil Drain And Ground Wire. (Sheet 2 Of 2)
• Figure F-22. Power Unit Fire Extinguisher, Oil Drain And Ground Wire. (Sheet 2 Of 2)
• Description And Usable On Code
• Description And Usable On Code
• Description And Usable On Code
• Figure F-23. Platforms (Sheet 1 Of 2).
• Figure F-23. Platforms (Sheet 2 O 2).
• Description And Usable On Codes
• Figure F-24. Power Plant/Power Unit Trailer Assembly (Sheet 1 Of 2)
• Figure F-24. Power Plant/Power Unit Trailer Assembly (Sheet 2 Of 2)
• Description And Usable On Code
• Description And Usable On Code
• Figure F-25. 1 1/2 Ton Trailer, An/Mjq-36 Fender
• Description And Usable On Codes
• Figure F-26. One Ton Trailer, Fenders, Pu-798, Pu-799
• Description And Usable On Codes
• Figure F-27. High Mobility Trailer, Mounting Rails And Fenders, (Pu 798a And Pu 799a). (Sheet 1 Of 2)
• Figure F-27. High Mobility Trailer, Mounting Rails And Fender, (Pu 798a And Pu799a). (Sheet 2 Of 2).
• Description And Usable On Code
• Description And Usable On Code
• Figure F-28. Jack Leveling-Support Assembly.
• Description And Usable On Code
• Figure F-29. Power Plant/Power Unit Trailer Assembly.
• Description And Usable On Code
• Description And Usable On Codes
• Section Iv Cross- Reference-Indexes
• National Stock Number Index
• Part Number Index
• Part Number
• Part Number
• Part Number
• Part Number
• Part Number
• Part Number
• Part Number
• Figure And Item Number Index
• Figure And Item Number Index
• Figure And Item Number Index
• Figure And Item Number Index
• Figure And Item Number Index
• Figure And Item Number Index
• Figure And Item Number Index
• Figure And Item Number Index
• Appendix G List Of Manufactured Items
• Figure G-1. Electrical Leads
• Figure G-2. Relay Board Harness Assembly W11 (Sheet 1 Of 2).
• Figure G-2. Relay Board Harness Assembly W11 (Sheet 2).
• Figure G-3. Switch Box Harness Assembly W9 (Sheet 1 0f 4)
• Figure G-3. Switch Box Harness Assembly W9 (Sheet 2 0f 4)
• Figure G-3. Switch Box Harness Assembly W9 (Sheet 3 0f 4)
• Figure G-3. Switch Box Harness Assembly W9 (Sheet 4 0f 4)
• Figure G-4. Output Connector Harness Assembly W10 (Sheet 1 Of 2)
• Figure G-4. Output Connector Harness Assembly W10 (Sheet 2).
• Figure G-5. Cable Assembly W1 And W2 (Sheet 1 Of 2).
• Figure G-5. Cable Assembly W1 And W2 (Sheet 2).
• Figure G-6. Deck Covering.
• Figure G-7. Switch Box Gasket.
• Appendix H Torque Limits
• Appendix I Mandatory Replacement Parts
• Glossary
• Section Ii. Definition Of Unusual Terms
• Index
• Index -Cont
• Index -Cont
• Index -Cont
• Index -Cont
• Figure Fo-1. Power Plant Wiring Diagram
• Fo-2. Power Plant Schematic
• The Metric System And Equivalents

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing