TM-9-6115-653-14P0001.gif
TM-9-6115-653-14P0002.gif
TM-9-6115-653-14P0003.gif
TM-9-6115-653-14P0004.gif
TM-9-6115-653-14P0005.gif

Tm-9-6115-659-13p

• Section I. General Information
• Figure L-1. Features Of An/Mjq-35.
• Figure 1-2 1. Features An/Mjq-A.
• Figure 1-2.2. Features Of Pu-797a.
• Section Ii. Equipment Description
• 1-10. Location And Description Of Major Components
• Figure 1-5. Location Of Major Components, An/Mjq-36.
• Figure 1-6. Location Of Major Components, Pu-797 And Pu-797a.
• 1-11. Differences Between Models
• Section Iii. Principles Of Operation
• Section Ill. Principles Of Operation
• Chapter 2 Operating Instructions
• Section I. Description And Use Of Operator Controls And Indicators
• Table 2-1. Description Of Switch Box Controls And Indicators
• Section Il. Operator Preventive Maintenance Checks And Services
• 2-2.4.3 Routine Inspections
• 2-2.6 Operation Of Power Plant/Power Unit With Minor Leaks
• Figure 2-2. An/Mjq-35 Power Plant Operator Pmcs Routing Diagram
• Figure 2-3. An/Mjq-36 Power Plant Operator Pmcs Routing Diagram.
• Figure 2-3.1. An/Mjq-35a Power Plant Operator Pmcs Routing Diagram.
• Figure 2-3.2 Pu-797a Power Unit Operator Pmcs Routing Diagram.
• Figure 2-4. Pu-797 Power Unit Operator Pmcs Routing Diagram.
• Table 2-2. Operator Preventive Maintenance Checks And Services
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Operator Preventive Maintenance Checks And Services - Continued
• Table 2-2. Operator Preventive Maintenance Checks And Services
• Operator Preventive Maintenance Checks And Services -Cont
• Operator Preventive Maintenance Checks And Services -Cont
• Operator Preventive Maintenance Checks And Services -Cont
• Operator Preventive Maintenance Checks And Services -Cont
• Operator Preventive Maintenance Checks And Services -Cont
• Operator Preventive Maintenance Checks And Services -Cont
• Operator Preventive Maintenance Checks And Services -Cont
• Operator Preventive Maintenance Checks And Services -Cont
• Operator Preventive Maintenance Checks And Services -Cont
• Operator Preventive Maintenance Checks And Services -Cont
• Operator Preventive Maintenance Checks And Services -Cont
• Operator Preventive Maintenance Checks And Services -Cont
• Operator Preventive Maintenance Checks And Services -Cont
• Operator Preventive Maintenance Checks And Services -Cont
• Section Iii. Operation Under Usual Conditions
• Figure 2-6. Auxiliary Fuel (Typical).
• 2-3.3 GroundingOf Generator Set.
• Figure 2-7. Ground Rod And Slide Hammer.
• 2-3.4 Connecting Load
• Figure 2-8. Power Plant And Power Unit Ground Connections
• Figure 2-9. Switch Box Load Cable Connections.
• 2-5.3.1 Operating A Single Generator Set
• 2-5.3.2 Load Transfer
• 2-5.3.3 Stopping Generator Set.
• Figure 2-12. An/Mjq-36 Identification/Transportation Data Plate.
• Figure 2-13.1. An/Mjq-35a Shipping Data/Identification Plate.
• Figure 2-13.3. An/Mjq-35a And Pu-797a Trailer Chassis Identification Plate.
• 24-.7 Power Plant Instruction Plate.
• 2-7 Preparation For Movement.
• Figure 2-15. Remove Ground Rod
• 2-7.4 Retrieve Fire Extinguisher(S)
• Figure 2-16. Disconnect Auxiliary Fuel (Typical).
• Section Iv. Operation Under Unusual Conditions
• Chapter 3 Operator Maintenance
• Section I. Operator Lubrication
• Section Ii. Troubleshooting
• Figure 3-1. On Indicator Lamp Falls To Light With Generator Set Running.
• Figure 3-2. On-Line Indicator Lamp Fails To Fight When On/Off Switch Is Placed In On Position
• Figure 3-3. Synchroneing Indicator Lamps Fall To Light When Transfer Switch Is Operated
• Figure 3-4. With All Indicator Lamps Working Properly, Load Will Not Transfer.
• Figure 3-5. Synchronizing Indicator Lamps Fail To Operate Ln Unison When Transfer Switch Is Operated.
• Section Iii. Maintenance Procedures
• Chapter 4 Unit Maintenance
• Section Vii
• Section I. Repair Parts; Special Tools; Test, Measurement, And Diagnostic Equipment (Imde); And Support Equipment
• Section Il. Service Upon Receipt
• 4-5 Installation Instructions
• 4-5.2.2 Assembly Of Power Plant An/Mjq-35a
• Figure 4-1. Installation Of Power Cables (Sheet 1 Of 2).
• Figure 4-1. Installation Of Power Cables (Sheet 2 Of 2).
• Figure 4-1.1. Installation Of Power Cables On An/Mjq-35a.
• 4-6 Preliminary Servicing And Adjustment Of Equipment
• Figure 4-2. Pu-797 And Pu-797a Ground Wire Installation.
• Section Iii. Unit Lubrication
• Section Iv. Unit Preventive Maintenance Checks And Services
• Figure 4-4. Unit Pmcs Routing Diagram (Sheet I Of 2).
• Figure 4-4. Unit Pmcs Routing Diagram (Sheet 2 Of 2).
• Table 4-1. Unit Preventive Maintenance Checks And Services
• Section V. Troubleshooting
• Figure 4-5. On Indicator Lamp Serviceable But Fails 10 Light With Generator Set Running
• Figure 4-6. On-Line Indicator Lamp Serviceable But Fails To Light When On/Off Switch Is Placed In On Posilion
• Figure4-7. Synchronfzing Lndicator Lamps Fail To Light When Transfer Switch Ls Operated.
• Figure 4-8. No Power To Load Wtih On-Line Lndicaforlamp On.
• Figure 4-9. All Lndicator Lamps Working Properly But Load Will Not Transfer
• Section Vi. Maintenance Procedures
• Figure 4-10. Power Cable Connections To Switch Box Contactors.
• Figure 4-11. Disconnect Power Cable From Generator Set.
• Figure 4-12. Disconnect Power Cable From Switch Box Terminals.
• Installation
• 2. Insert Terminal Lug
• 4-13 Switch Box Maintenance
• Figure 4-13. Switch Box Repair
• 2. Data Plate Replacement
• 4-14 Indicator Light Assembly Maintenance
• Table 4-2. Indicator Light Assernbly Test Points
• 4-15. Synchronizing Light Maintenance
• Test
• 4-16 Toggle Switch Maintenance.
• Figure 4-16. Toggle Switch
• 4-17 Switch Box Load Terminal Maintenance.
• Figure 4-17. Switch Box Load Terminal Maintenance (Sheet 1 Of 2).
• Figure 4-17. Switch Box Load Terminal Maintenance (Sheet 2).
• 4-18 Load Terminal Cover Maintenance
• Figure 4-18. Loud Terminal Cover.
• 4-19 Accessory Box Maintenance.
• Figure 4-20. Repair Accessory Box.
• 4-20 Fire Extinguisher Bracket Maintenance
• 4-21 Trailer Lifting Ring Maintenance.
• 4-22 Data Plate And Reflector Maintenance
• Figure 4-21.1. Identification/Transportation Data Plate And Reflector Replacement.
• Figure 4-22. Shipping Data/Identification Plate Replacement
• 4-23 An/Mjq-35 Trailer Splash Guard, Bracket, And Fender Maintenance
• Figure 4-23. An/Mjq-35 Splash Guard, Bracket, Ground Stud, And Fender
• Installation
• 4-24. Pu-797 And An/Mjq-36 Trailer Platform Maintenance
• 4-25 Pu-797 Fender Maintenance
• Figure 4-25. Pu-797 Fender.
• Installation
• 4-26 An/Mjq-36 Fender Maintenance
• Figure 4-26. An/Mjq-36 Fender.
• Installation
• 4-27 1 Ton Trailer Rear Leveling-Support Jack Maintenance
• Figure 4-27. Rear Leveling-Support Jack Replacement, 1 Ton Trailer.
• Figure 4-28. Rear Leveling-Support Jack Repair, 1 Ton Trailer.
• 4-28 Pu-797a And An/Mjq-35a Ground Stud Replacement
• Section Vii. Administrative Storage
• Chapter 5 Direct Support Maintenance
• Section I. Repair Parts; Special Tools; Test, Measurement, And Diagnostic Equipment (Tmde); And Support Equipment
• Section Ii. Troubleshooting
• Figure 5-1. On Indicator Lamp Assembly Tests Good, But On Indicator Lamp Fails To Light With Generator Set Running
• Figure 5-2. On-Line Indicator Lamp Assembly And On/Off Switch Serviceable, But On-Line Indicator Lamp Fails To Light When On/Off Switch Is Placed In On Position
• Figure 5-3. Synchronizinging Indicator Lamps And Transfer Switch Serviceable, But Synchronizing Indicator Lamps Fail To Light When Transfer Switch Is Closed And Then Released
• Figure 5-4. All Indicator Lamps Working Property, But Load Will Not Transfer.
• Section Iii. Maintenance Procedures
• Figure 5-5. Power/Load Cable Removal.
• 3. Remove Four Nuts
• Figure 5-6. An/Mjq-35 Roadside Fender Assembly Removal
• Figure 5-7. Removing Generator Set Mounting Hardware (Sheet 1 Of 2).
• Figure 5-7. Removing Generator Set Mounting Hardware (Sheet 2 Of 2).
• Installation
• Figure 5-8. Switch Box Components.
• 5-7 Electrical Leads W3-W8 Maintenance
• Figure 5-9. Switch Box Lead Connections.
• 5-8 Switch Box Harness W9 Maintenance.
• Figure 5-10. Switch Box Relay Board Assembly
• Table 5-1. Switch Box Harness Wire List
• Figure 5-11. Disconnect Switch Box Harness W9 From Contactor.
• Figure 5-13. Relay Board Assembly Removal.
• Installation
• 5-9 Relay Board Harness W11 Maintenance
• Figure 5-14. Relay Board Harness Assembly W11 Removal.
• Removal
• Tdble 5-3. Output Connector Harness Continuity Check
• Figure 5-15. Output Connector Harness.
• 5-11 Relays K3-K6 Maintenance.
• Figure 5-17. Relay K3-K6 Schematic.
• 5-12 Permissive Paralleling Relay Maintenance.
• Removal
• 5-13 Contactors K1 And K2 Maintenance
• Figure 5-19. Replace Contactor
• Table 5-5. Contactor Operation
• 5-14 Resistors Ri-R3 Maintenance.
• Figure 5-20. Resistors, Capacitors, And Diodes.
• 5-15 Capacitors C1-C4 Maintenance.
• 5-16 Diodes Cr1-Cr4 Maintenance
• 5-16.1 Pu-797a And An/Mjq-35a Floor And Fender Maintenance.
• Figure 5-20.1. Pu-797a And An/Mjq-35a Floor Replacement.
• Figure 5-20.2. Pu-797a And An/Mjq-35a Fender Replacement.
• 5-17 An/Mjq-35, An/Mjq-36, And Pu-797 Trailer Fender Repair
• Figure 5-21. Replace An/Miq-35 Generator Mounting Rail.
• 5-19 An/Mjq-35 Generator Mounting Rail Maintenance
• Figure 5-22. Replace An/Wjq-36 Generator Mounting Rail.
• 5-20 Pu-797 Generator Mounting Rail Maintenance.
• Figure 5-23. Replace Pu-797 Generator Mounting Rail.
• 5-21 An/Mjq-35 Trailer Lifting Bracket Maintenance
• Figure 5-24. An/Mjq-35 Trailer Lifting Bracket.
• Installation
• 2. Install Rear Lifting Bracket
• 5-22 Pu-797a And An/Mjq-35a Generator Mounting Rail Maintenance
• Figure 5-25. Pu-797a And An/Mjq-35a Generator Mounting Rail Replacement.
• 5-23 High Mobility Trailer Rear Leveling-Support Jack Maintenance.
• Figure 5-26. Rear Leveling-Support Jack Replacement, High Mobility Trailer.
• Appendix A References
• A-7 Military Standards.
• A-9 Lubrication Orders
• Appendix B Maintenance Allocation Chart
• B-3 Explanation Of Columns In The Mac
• B-4 Explanation Of Columns In Tool And Test Equipment Requirements
• Section Ii. Maintenance Allocation Chart
• Maintenance Allocation Chart -Cont
• Section Iii. Tool And Test Equipment Requirements
• Section Iv. Remarks
• Appendix C Components Of End Item (Coei) And Basic Issue Items (Bll) Usts
• Section Ii. Components Of End Item
• Section Iii. Basic Issue Items
• Appendix D Additional Authorization List
• Appendix E Expendable And Durable Items List
• Section Ii.Expendable And Durable Items List
• Appendix F Unit And Direct Support Maintenance Repair Parts And Special Tools List
• F-3.2 Smr Code
• F-3.2.2 Maintenance Code
• F-3.2.3 Recoverability Code.
• F-3.5 Description And Usable On Code
• F-5 Special Information.
• F-6 How To Locate Repair Parts
• Figure F- 1. Generator Set, Installation.
• Description And Usable On Codes
• Figure F-2. Generator Set, Power Unit.
• Description And Usable On Codes
• Figure F-3. Power Cables.
• Description And Usable On Codes
• Figure F-4. Cable Assembly
• Description And Usable On Codes
• Description And Usable On Codes
• Figure F-5. Switch Box Installation
• Description And Usable On Codes
• Figure F-6. Relay Board Harness Assembly (Sheet 1 Of 2)
• F-6. Wire Parts List (Sheet 2 Of 2)
• Description And Usable On Codes
• Description And Usable On Codes
• Figure F-7. Permissive Paralleling Relay
• Description And Usable On Codes
• Figure F-8. Indicator Lights
• Description And Usable On Codes
• Figure F-9. Light Assembly
• Description And Usable On Codes
• Figure F-10. Switches
• Description And Usable On Codes
• Figure F-11. Load Terminal Cover
• Description And Usable On Codes
• Figure F-12. Load Terminal
• Description And Usable On Codes
• Figure F-13. Electrical Leads
• Description And Usable On Codes
• Description And Usable On Codes
• Figure F-14. Output Connector Harness Assembly
• Description And Usable On Codes
• Figure F-15. Switch Box Harness Assembly (Sheef 1 Of 2)
• Figure F-15. Switch Box Harness Assembly (Sheet 2 Of 2)
• Description And Usable On Codes
• Figure F-16. Contactor
• Description And Usable On Codes
• Figure F-17. Resistor R3
• Description And Usable On Codes
• Figure F-18. Switch Box Assembly
• Description And Usable On Codes
• Description And Usable On Codes
• Figure F-20. Accessory Box
• Description And Usable On Codes
• Description And Usable On Codes
• Figure F-21. Power Plant Fire Extinguisher, Oil Drain And Ground Wire. (Sheet 1 Of 2)
• Figure F-21. Power Plant Fire Extinguisher, Oil Drain And Ground Wire. (Sheet 2 Of 2)
• Description And Usable On Codes
• Description And Usable On Codes
• Figure F-22. Power Unit Fire Extinguisher, Oil Drain And Ground Wire (Sheet 1 Of 2).
• Figure F-22. Power Unit Fire Extinguisher, Oil Drain And Ground Wire (Sheet 2 Of 2).
• Description And Usable On Codes
• Figure F-23. Platforms
• Description And Usable On Codes
• Figure F-24. Power Plant/Power Unit Trailer Assembly (Sheet 1 Of 2).
• Figure F-24. Power Plant/Power Unit Trailer Assembly (Sheet 2 Of 2)
• Description And Usable On Codes
• Description And Usable On Codes
• Figure F-25. Splash Guard
• Description And Usable On Codes
• Figure F-26. Fenders, Rails, Lifting Rings And Brackets, One Ton Trailer, An/Mjq-35
• Description And Usable On Codes
• Figure F-27. 1 1/2 Ton Trailer, An Mjq-36 Fender
• Description And Usable On Codes
• Figure F-28. Fenders, One Ton Trailer, Pu-797
• Description And Usable On Codes
• Figure F-29. High Mobility Trailer, Mounting Rails And Fenders, (An/Mjq-35a And Pu-797a). (Sheet 1 Of 2)
• Figure F-29. High Mobility Trailer, Mounting Rails And Fenders, (An/Mjq-35a And Pu-797a). (Sheet 2. Of 2)
• Description And Usable On Codes
• Description And Usable On Codes
• Figure F-30. Jack Leveling-Support Assembly.
• Description And Usable On Codes
• Figure F-31. Power Plant/Power Unit Trailer Chassis Assembly.
• Description And Usable On Codes
• Description And Usable On Codes
• Section Iv Cross- Reference-Indexes
• National Stock Number Index
• Stock Number
• Cross-Reference Indexes
• Part Number Index
• Part Number
• Part Number
• Part Number
• Part Number
• Part Number
• Part Number
• Part Number
• Figure And Item Number Index
• Figure And Item Number Index
• Figure And Item Number Index
• Figure And Item Number Index
• Figure And Item Number Index
• Figure And Item Number Index
• Figure And Item Number Index
• Figure And Item Number Index
• Figure And Item Number Index
• Appendix G Illustrated List Of Manufactured Ltems
• Dimensions And Parts List
• Figure G-2. Relay Board Harness Assembly W11 (Sheet 1 Of 2)
• Figure G-2. Relay Board Harness Assembly W11 (Sheet 2).
• Figure G-3. Swich Box Harness Assembly W9 (Sheet 1 Of 4)
• Figure G-3. Swich Box Harness Assembly W9 (Sheet 2 Of 4)
• Figure G-3. Swich Box Harness Assembly W9 (Sheet 3 Of 4)
• Figure G-3. Swich Box Harness Assembly W9 (Sheet 4 Of 4)
• Figure G-4. Output Connector Harness Assembly W10 (Sheet 1 Of 2).
• Figure G-4. Output Connector Harness Assembly W10 (Sheet 2).
• Figure G-5. Cable Assembly W1 And W2 (Sheet 1 Of 3).
• Figure G-5. Cable Assembly W1 And W2 (Sheet 2)
• Figure G-5. Cable Assembly Wi And W2 (Sheet 3).
• Figure G-6. Deck Covering
• Figure G-7. Switch Box Gasket.
• Appendix H. Otrque Limits
• Appendix I Mandatory Replacement Parts
• Glossary
• Section Ii. Definition Of Unusual Terms
• Index
• Index -Cont
• Index -Cont
• Index -Cont
• Index -Cont
• Figure Fo-1. Power Plant Wiring Diagram.
• Fo-2. Power Plant Schematic
• The Metric System And Equivalents

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing