|
| |
Back
Table 2-2. Operator Preventive Maintenance Checks and Services | Up
TM-9-6115-659-13P Power Unit PU-732/M (NSN 6115-00-280-3082) MEP-118A 15 Kw 400 Hz Generator Set M200A1 2-Wheel 4-Tire Modified Trailer Manual | Next
Operator Preventive Maintenance Checks and Services - continued |
TM 9-6115-659-13&P
Table 2-2. Operator Preventive Maintenance Checks and Services - continued
Location
Item
Interval
Procedure
Not Fully Mission
No.
Item to
Capable if:
Check/Service
WARNING
If trailer is not coupled to towing vehicle, ensure that wheels are securely chocked.
Failure to do so may cause trailer to roll, resulting in injury to personnel or damage to
equipment.
NOTE
Both handbrake levers (1) are adjusted the same way. This procedure covers one
handbrake lever.
d. Handbrake Lever Adjustment
(1) Release handbrake lever (1).
(2) Turn adjustment knob (2) clockwise
to tighten or counterclockwise to
loosen. If unable to adjust, or
adjustment has been used up, refer
to Unit Level Maintenance.
(3) Check adjustment (Refer to step b).
Repeat steps (1) and (2) as required.
Repeat step c.
2
Before
LANDING LEG
a. With trailer connected to towing
Landing leg
ASSEMBLY
vehicle, check landing leg assembly (3)
assembly will not
for ease of operation.
secure in stored
position or will not
support trailer.
b. Check landing leg assembly (3) for
proper mounting, alignment, and
general condition.
c. Ensure landing leg assembly (3) can be
locked in stored and support positions.
d. Ensure locking lever (4) moves freely.
e. Ensure landing leg foot or wheels (5)
can be adjusted up and down.
Change 2 2-11
|
