Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: Table 2-2. Operator Preventive Maintenance Checks and Services
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 

Back
Figure 2-2.  Operator PMCS Routing Diagram
Up
TM-9-6115-658-13P Power Unit PU707A/M (NSN 6115-00-394-9573) MEP-115A 60 Kw 400 Hz Generator Set M200A1 2-Wheel 4-Tire Modified Trailer Manual
Next
Operator Preventive Maintenance Checks and Services – (continued)

TM 9-6115-658-13&P 2-8 Table 2-2.  Operator Preventive Maintenance Checks and Services NOTE If the equipment must be in continuous operation, check and service only those items that can be checked and serviced without disturbing operation. Make the complete checks and services when the equipment can be shut down. ITEM NO. INTERVAL              LOCATION     PROCEDURE NOT FULLY MISSION CAPABLE IF: Item to Check/Service Before performing any maintenance that requires climbing on or under trailer, make     sure that trailer handbrakes are set, and front and rear trailer support legs are lowered. Failure to observe this warning could result in severe personal injury or death. TRAILER 1 Before HANDBRAKES a.  Check for proper operation of   handbrake lever (1).  Handbrake lever           should move freely throughout its entire          travel. b.  Check for proper adjustment of                   handbrake lever (1).  Handbrake lever is       properly adjusted when additional force is      required to move handbrake lever beyond      two-thirds distance of travel toward the         applied position.  If improperly adjusted,        refer to step d. c.  With trailer hooked to towing vehicle, set    the handbrake lever (1).  Move the trailer      slightly to see if the handbrakes hold the       wheels.  If not, proceed to step d. Handbrake lever (1) is locked in the applied position. WARNING

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing