Figure 2-7. Removal of Conduit Box Cover Assembly

TM 9-6115-604-34 NAVFAC P-8-633-34 Figure 2-7. Removal of Conduit Box Cover Assembly CAUTION Take care when lifting generator, as there is enough slack In generator cables and wiring to remove generator without disconnecting cables and wiring, providing the generator is not lifted and moved beyond limits stated In paragraph 2-15b(9). (9) Lift generator approximately 0. 500 inches (12.7mm) or until generator feet dear generator mounting pads, and move in rearward direction 6 inches (152.4 mm) and lower to generator mounting pads. WARNING Use of slings, chains, or lifting hoists not rated for the weight of the engine assembly may result Injury to personnel and failing damage to equipment. Lifting gear must be rated for 15,000 pounds (680O kg), minimum. (10) See Figure 2-5 and Figure 2-6. Rig the engine assembly for lifting. There are four lifting brackets mounted to the cylinder block between the cylinder head assemblies. Use locking lifting hooks on the brackets. Actuate the hoist enough to take the slack out of the lifting chassis, but do not lift the engine at this time. 2-31