|
| |
Back
SECTION IV. REMOVAL AND INSTALLATION OF MAJOR COMPONENTS | Up
TM-9-6115-604-34 Generator Set Diesel Engine Driven Tactical Skid Mtd 5 Kw. 1 Phase-2 Wire 1 Phase -3 Wire 3 Phase -4 Wire 120. 120/240 and 120/208 Volts Manual | Next
Figure 2-4. Engine and Generator G1, Removal, Installation, and Alignment (Sheet 1 of 4) |
TM 9-6115-604-34
NAVFAC P-8-633-34
Figure 2-2. Removal of Roof Panels
(19)
Remove roofing panels 1 through 4 (see Figure 2-2) above the engine in accordance with paragraph 4-13
of the Operator and Organizational Maintenance Manual and Figure 4-12.
(20)
Remove the air cleaner assemblies in accordance with paragraph 4-74 of the Operator and Organizational
Maintenance Manual.
(21) Remove the cover and screen from the adapter between the generator and engine. See Figure 2-3.
Figure 2-3. Removal of Cover and Screen
(22)
See Figure 2-4, detail B. Bend back the corners of the locking plates and remove hexagon head
capscrews to disconnect the generator drive discs from the engine flywheel.
(23)
See Figure 2-4, detail B. Remove the hexagon head capscrews and washers securing the adapter to the
flywheel housing. Start with the screws nearest the 12 o'clock position and work back and forth around the
circle down to the 6 o'clock position.
2-23
|
