TM 9-6115-604-34 NAVFAC P-8-633-34 Table 1-1.  Special Torque Data (Continued) DESCRIPTION FIG. Ref. POUND-INCHES POUND-FEET NO. NO. (NEWTON-METERS) (NEWTON-METERS) MIN MAX MIN MAX GENERATOR Generator armature mounting Figure 5-1 12 95 capscrew (10.7) Generator drive disks to drive Figure 5-1 20 216 hub capscrews (Special se- (24.4) quence, see Figure 5-7) Generator drive disks- to-fly- Figure 2-4 -- 112 wheel capscrews (12.7) Generator machining adapter to Figure 2-4 -- 50 flywheel housing capscrews (5.6) Generator machining adapter to Figure 5-1 26 60 main stator and frame (6.8) assembly capscrews Generator rectifier mounting nut Figure 5-1 35 and 20 30 36 (2.3) (3.4) Generator support mounting Figure 2-4 -- 850 capscrews (96.0) Generator stator mounting Figure 5-1 8 60 capscrews (6.8) LUBRICATION SYSTEM Oil connection to cylinder block Figure 8-4 14 30 35 capscrews (3.4) (4.0) Oil cooler cover to cylinder Figure 8-2 2 and 3 25 30 block capscrews (2.8) (3.4) Oil cooler element locknut Figure 8-2 1 40 45 (4.5) (5.1) Oil pump assembly to cylinder Figure 8-4 24 70 75 block capscrews (7.9) (8.4) Oil pump cover to body Figure 84 37 30 35 capscrews (3.4) (4.0) Oil suction tube to oil pump Figure 8-4 7 30 35 capscrews (3.4) (4.0) Oil transfer tube to oil pump and Figure 8-4 16 and 30 35 oil connection capscrews 21 (3.4) (4.0) Piston cooling nozzle capscrew Figure 9-24 37 5 8 (0.6) (0.9) Pressure relief housing to Figure 8-4 21 30 35 cover capscrews (3.4) (4.0) 1-7