TM 9-6115-604-34 NAVFAC P-8-633-34 Table 1-1.  Special Torque Data (Continued) DESCRIPTION FIG. Ref. POUND-INCHES POUND-FEET NO. NO. (NEWTON-METERS) (NEWTON-METERS) MIN MAX MIN MAX ENGINE (CONT) Rocker arm shaft attaching Figure 9-2 8, 9 60 70 capscrews (6.8) (7.9) Thrust bearing retainer Figure 9-24 35 30 35 capscrews (3.4) (4.0) Thrust bearing retainer plate Figure 9-24 24 20 25 capscrews (2.3) (2.8) Timing gear idler shaft Figure 9-15 33, 39 175 180 capscrew and bolt (19.8) (20.3) Turbocharger, back-plate-to- Figure 9-70 15 90 110 center housing bolt (10.2) (12.4) Turbocharger center housing to Figure 9-70 4 100 110 turbine housing bolt (11.3) (12.4) Turbocharger retension strap 40 45 capscrews (4.5) (5.1) Turbocharger, turbine shaft locknut (Special procedure, see Figure 9-77) Turbocharger Vee band locknut Figure 9-70 1 40 60 (4.5) (6.8) Vibration damper capscrews Figure 9-59 1 360 380 (Special procedure, see para- (40.7) (42.9) graph 9-34 and Figure 9-60) FUEL SYSTEM Accessory drive to front gear Figure 6-36 13, 14 45 55 cover capscrews. and 15 (5.1) (6.2) Ether jets Figure 9-78 6 75 85 (8.5) (9.6) Ether lines -- -- 40 50 (4.5) (5.6) Fuel Injection Pump Actuator to housing Figure 6-5 1 75 capscrews (Special (8.5) sequence, see paragraph 6-11 and Figure 6-6 ) Damper body to plate Figure 6-7 1 9 11 capscrews (1.0) (1.24) Damper to gear pump Figure 6-5 7 11 13 capscrews (1.24) (1.5) Front cover to accessory Figure 6-5 33 40 45 drive mounting (4.5) (5.1) capscrews 1-5