FABRICATION

TM5-6115-634-14&P NAVFAC P-8-647-14&P T0-35C2-3-445-14 TM-6115-14&P/1 4-11. REPLACE BATTERY CABLES (cont) FABRICATION REPLACE BATTERY CABLE. Replacement of the battery cables is by fabrication (see Appendix G). INSTALLATION INSTALL BATTERY CABLE. NOTE The negative cable lead is marked with black shrink tubing and the positive cable lead is marked with red shrink tubing. a. Get a new set of battery cables and route cables through the skid base assembly, with con- nector ends for batteries out- wards, and secure the connector strain reliefs to the skid base. b. Secure the negative cable lead (see note), to the starter mounting plate with screw (7), and lockwasher (8). Secure the positive cable lead to the starter solenoid with lock- washer (6) and nut (5). c. Route the cables through the bushing on the battery box. Secure the positive lead to the positive battery terminal connector with lockwasher (4) and nut (3). Secure the nega- tive lead to the negative battery terminal connector with lockwasher (2) and nut (1). Inspect all connections to ensure the connections are tight. 4-11