|
| |
Back
Table 4-2. PU 794/G, TROUBLESHOOTING PROCEDURES | Up
TM-5-6115-634-14P Power Plant AN/MJQ-16 (NSN 6115-00-033-1395) (2) MEP-002A 5 Kw 60 Hz Generator Sets M103A3 2-Wheel 2-Tire Modified Trailer Manual | Next
INSPECTION |
TM5-6115-634-14&P
NAVFAC P-8-647-14&P
T0-35C2-3-445-14
TM-6115-14&P/1
MAINTENANCE OF BATTERY BOX ASSEMBLY
4-10. REPLACE BATTERY
This task covers: a. Removal
c. Installation
b. Inspection
INITIAL SETUP
Tools
General Safety Instructions
General Mechanic’s Tool Kit
5180-00-177-7033
Electrolyte and battery corrosion
Materials/Parts
can cause injury to you.
Be careful
Battery
not to splash electrolyte on yourself
or the equipment.
96906-MS35000-3 (2 ea)
Equipment Conditions
Reference
Para. 4-9 General Instructions.
REMOVAL
1.
2.
REMOVE BATTERY RETAINER.
a.
Remove three nuts (1) flat
washers (2) and rods (3).
b.
Lift off battery retainer (4).
REMOVE BATTERIES.
NOTE
When removing battery
cables, always disconnect
the negative cable first.
a.
Remove cable clamp from nega-
tive terminal (5) and move to
side of battery box (6).
b.
Remove cable clamp from posi-
tive terminal (7) and move to
side of battery box (6).
4-8
|
