Table 4-2. PU 794/G, TROUBLESHOOTING PROCEDURES

TM5-6115-634-14&P NAVFAC P-8-647-14&P T0-35C2-3-445-14 TM-6115-14&P/1 Table 4-2. PU 794/G, TROUBLESHOOTING PROCEDURES MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION 1. PU 794/G WILL NOT START USING REMOTE CONTROL UNIT, BUT STARTS WITH SHORTING PLUG INSTALLED. PU 794/G must be shut down before checking cable connectors. Failure to do so could result in serious injury or death by electrocution. Step 1. Connect 5-foot control cable from connector plate to unit 2 control connection on junction box. Attempt to start unit with SET No. 2 controls on remote control unit. PU 794/G must be shut down before disconnecting remote control unit. Serious injury or death by electrocution could result if procedure is performed with power unit running. If the unit starts, the remote control unit is faulty. Replace the remote control unit. PU 794/G must be shut down before performing all tests. Failure injury or death Step 2. Test the control box. to do so could result in serious by electrocution. cables, remote control cable and junction Replace faulty cable or junction box. Step 3. If unit still will not start, the remote functions box assembly is faulty. Report to intermediate direct support maintenance. 4-6