TM5-6115-634-14&P NAVFAC  P-8-647-14&P TO-35C2-3-445-14 TM-6115-14&P/1 b. Trailer. The trailer is a modi- fied M200A1, 2 1/2 ton, 2-wheel trailer. Towing Facilities Lunette Towing Vehicle 5-ton 6x6 Brakes Air over hydraulic Handbrakes Mechanical, handlever controlled Tires Pneumatic, normal use 35 psi (3.16 kg/sq cm). In mud, snow and sand use 15 psi (1.06  kg/sq cm). 24 VDC Voltage (lighting) c.  PU   794/G Figure 1-3 shows the data plates identifying the PU 794/G. Length 181 inches (459.74 cm) Width 97 inches (246.34 cm) Height 98 inches (248.92 cm) Weight 6440 lbs (2921.18 kg) Operating Range -1O°F to 110°F (-24°C to 43°C) at sea level -lO°F to 95°F (-24°C to 35°C) up to 3000 feet (914.4 M) Maximum 150 (26 percent) slope from the level in any direction Section III. PRINCIPLES  OF  OPERATION 1-11. Principles of Operation trailer can be towed over prepared roads at a maximum speed of 55 mph (88.5 km/h), The PU 794/G provides 20 kW, 60 HZ pre- and over unimproved roads at a maximum cise power. It is noise suppressed and speed of 30 mph (48.3 km/h). It will EMP  protected. It is designed to be ford hard-bottom water crossings to any operated and paralleled remotely from a depth that can be negotiated by the towing distance up to 100 feet (30.48 M). The vehicle. Section IV. SERVICE  UPON  RECEIPT 1-12. Unpacking/Uncrating the PU 794/G g. Lift the generator and remove the plywood shipping base from the trailer. a. Remove the packing list from the right front side of the crate and set h. Set the generator back on the aside. trailer and reinstall the mounting bolts. b. Using metal cutters, cut the band from around the crate. i. Remove the packing material from the battery box, cable tray, accessory c. Remove the crate from the top of box , the generator set. d. Cut the barrier paper along the from base of generator set. k. j. and the document box compartment. Remove the bands and plywood cap the cable reels. Use the packing list and inventory e. Remove the barrier paper and des- the accessories. Report any discrepan- sicant  bags. cies to your supervisor. f. Remove the mounting bolts that 1. Remove  all  packing/cushioning mount the generator to the trailer. material from the cables and tools. 1-7