Back Figure 2-10. Starting Instructions when Ambient Temperature is from 40°F to -25°F (4.4°C to -32°C) and Housing Kit is Installed (Sheet 3 of 3)
Up TM-5-6115-593-12 Power Plant Utility (MUST) Gas Turbine Engine Driven (AMERTECH Corp Model APP-1) Manual
Next Figure 2-12. Single Generator Unit, Operating Instructions with Housing Kit Installed
TM 5-6115-593-12TO 35C2-3-463-1STEP 1.PLACE ACPWRCKTBKRIN OPEN POSITION APPROXIMATELY 2 OR 3 SECONDS; THE ACPWRCKTBKRCLOSEDLIGHT SHOULD GO OUT.WARNINGShutters will snap shut rapidly with considerable force when generator set is stopped. Ensure allpersonnel are clear of shutters before placing MASTERswitch to STOP. Serious injury couldresult.STEP 2.PLACE MASTERSWITCH IN STOPPOSITION AFTER ALLOWING ENGINE TO COOL BY OPERATING ATNO LOAD FOR APPROXIMATELY 5 MINUTES.STEP 3.AFTER ENGINE STOPS, REMOVE DC CONTROL POWER BY SETTING 24VDCCONTROLCIRCUITBREAKERTOOFFPOSITION.Figure 2-11. Stopping Instructions with Housing Kit Installed.2-26
