|
| |
Back
Figure 2-6. Starting Instructions (Sheet 3 of 3) | Up
TM-5-6115-593-12 Power Plant Utility (MUST) Gas Turbine Engine Driven (AMERTECH Corp Model APP-1) Manual | Next
Figure 2-8. Single Generator Unit, Operating Instructions |
TM 5-6115-593-12
TO 35C2-3-463-1
STEP 1. PLACE AC PWR CKT BKR IN OPEN POSITION APPROXIMATELY 2 OR 3 SECONDS; THE AC PER CKT
BKR CLOSED LIGHT, SHOULD GO OUT.
WARNING
SHUTTERS WILL SNAP SHUT RAPIDLY WITH CONSIDERABLE FORCE WHEN GENERATOR SET
IS STOPPED. ENSURE ALL PERSONNEL ARE CLEAR OF SHUTTERS BEFORE PLACING MASTER
SWITCH TO STOP. SERIOUS INJURY COULD RESULT.
STEP 2. PLACE MASTER SWITCH IN STOP POSITION AFTER ALLOWING TO COOL BY OPERATING AT NO
LOAD FOR APPROXIMATELY 5 MINUTES.
STEP 3. AFTER ENGINE STOPS, REMOVE DC CONTROL POWER BY SETTING 24V DC CONTROL CIRCUIT
BREAKER TO OFF POSITION.
Figure 2-7. Stopping Instructions
2-18
|
