|
| |
Back
Table 2-2. Generator Control Panel, Controls and Instruments-Continued | Up
TM-5-6115-593-12 Power Plant Utility (MUST) Gas Turbine Engine Driven (AMERTECH Corp Model APP-1) Manual | Next
Table 2-3. AC-DC Control Panel, Controls and Instruments |
TM 5-6115-593-12
TO 35C2-3-463-1
Table 2-2. Generator Control Panel, Controls and Instruments-Continued
FIGURE,
INDEX NO.
CONTROL AND INSTRUMENT
FUNCTION
NORMAL
READING/SETTING
2-2,18
CLOCK MIN ADJ switch
Adjusts clock minute setting.
OFF
2-2,19
POWER FACTOR meter
Indicates
power
factor
of
generator set load.
0.8 lagging to 1.0
2-2,20
KVAR meter
Indicates KVAR of 3-phase, 4-
wire circuits.
Less than 75 percent
2-2,21
PARALLEL OPERATION- SINGLE
UNIT OPERATION switch
In
PARALLEL
OPERATION
position, activates all parallel
circuits;
in
SINGLE
UNIT
OPERATION
position,
it
deactivates all parallel circuits.
As required
2-2,22
PARALLEL lamp
Lights
indicating
that
PARALLEL
switch
is
in
PARALLEL position.
OFF
2-2,23
Panel lamp
Illuminates panel.
OFF
2-2,24
AC PWR CKT BKR-CLOSE- OPEN
circuit
Closes/opens AC power circuit
breaker
Neutral
2-2,25
AC PWR CKT BRK-CLOSED lamp
Indicates
AC
power
circuit
breaker is in closed position.
— — —
2-2,26
24V
DC
CONTROL
CIRCUIT
BREAKER switch
Controls application of 24V DC
to control circuits.
ON
2-2,27
SYNC light lamps
Indicates
synchronization
of
frequency for paralleling of
generator set.
OFF
2-2,28
SYNCHROSCOPE meter
Indicates
synchronization
of
frequency for paralleling of
generator set.
Floats
2-2,29
PANEL LT SW ON-OFF switch
Switches panel lamps on and
off.
— –—
2-2,30
BATTLE SHORT ON-OFF switch
Bypasses
generator
set
protective circuits during an
emergency, except overspeed
and short circuits.
OFF
2-2,31
TEL JACK
Allows telephone connection to
remote control module.
— — —
2-2,32
BATTLE SHORT lamp
Indicates
BATTLE
SHORT
switch is ON.
OFF
2-7
|
