|
| |
Back
Figure 2-1. Engine Control Panel (Part of Control Cubicle) | Up
TM-5-6115-593-12 Power Plant Utility (MUST) Gas Turbine Engine Driven (AMERTECH Corp Model APP-1) Manual | Next
Figure 2-2. Generator Control Panel (Part of Control Cubicle) |
TM 5-6115-593-12
TO 35C2-3-463-1
Table 2-1. Engine Control Panel, Controls and Instruments-Continued
FIGURE,
INDEX NO.
CONTROL AND INSTRUMENT
FUNCTION
NORMAL
READING/SETTING
2-1,8
Panel lamp
Illuminates engine panel.
— — —
2-1,9
Panel lamp
Illuminates engine panel.
— — —
2-1,10
BATTERY CHRG VOLTS meter
Indicates dc system voltage
26.8V DC
2-1,11
WATER TEMP gauge
Indicates
engine
coolant
temperature
180 to 200°F (356 to
382°C)
2-1,12
FUEL PUMP ON lamp
Illuminates indicating fuel transfer
pump is in operation.
Cycles On and Off
2-1,13
START AID ON-OFF switch
Actuates either starting aid as
required while engine is cranking at
speeds up to 1200 rpm.-
OFF
2-1,14
OVER CRANK lamp
Indicates cranking time has been
exceeded.
OFF
2-1,15
AUTO/MAN OPERATION switch
Select whether operation is to be
via control panel or automatic
control module
MAN
Table 2-2. Generator Control Panel, Controls and Instruments
FIGURE,
INDEX NO.
CONTROL AND INSTRUMENT
FUNCTION
NORMAL
READING/SETTING
2-2,1
VOLTS AC meter
Indicates AC output voltage.
120/208 or 240/416
2-2,2
Panel lamp
Illuminates panel.
— — —
2-2,3
1-2-3 lamp
Lights
to
indicate
phase
sequence 1,2,3
On
2-2,4
AMMETER switch
Selects phase 1,2, or 3 voltage.
As desired.
2-2,5
KW meter
Indicates power output of 3
phase, 4 wire generator.
Less than 100 percent nominal.
2-2,6
AMMETER meter
Indicates percent rated current
for selected phase.
Less than 100 percent.
2-2,7
Panel lamp
Illuminates panel.
— — —
2-2,8
ANNUNCIATOR RESET
Resets annunciating
OFF
2-2,9
ALARM SILENCE switch
Silences alarm.
OFF
2-4
|
