|
| |
Back
Figure 1-9. Instruction Plate Locations | Up
TM-5-6115-593-12 Power Plant Utility (MUST) Gas Turbine Engine Driven (AMERTECH Corp Model APP-1) Manual | Next
DC ELECTRICAL AND CONTROL SYSTEM. |
TM 5-6115-593-12
TO 35C2-3-463-1
Table 1-1. Torque Data
NOTE
Lubricate threads prior to torquing.
COMPONENT
TORQUE VALUE
FT/LBS
JOULES
Oil Pressure Switches
20
27
Spin-on filters
25 to 35
34 to 47
Mounting capscrew
Fuel filter capscrews
20 to 25
27 to 34
Injector hold-down capscrews
11 to 12
15 to 16
in increments of
4
5
Turbocharger
V-Band clamp tension
32 to 36*
3.6 to 4.1
Lubricating oil drain fitting
50
68
Diffuser plate capscrew
5 to 7
7 to 10
Intercooler capscrews
30 to 35
41 to 47
in increments of
15
20
Exhaust Manifold capscrews
35
47
in increments of
8
11
* In-lbs
Section III. SYSTEM OPERATION
1-13. GENERAL. This section covers theory of
operation for the following *generator set systems:
a.
DC Electrical and Control System
b.
AC Power Generation and Control System
c.
Fuel System
d.
Cooling System
e.
Lube Oil System
These systems are multipurposed in that there is some
overlapping functions from one system to another.
Certain
operations
may
be
described,
to
avoid
redundancy, under one system where as they actually
function within two or more systems.
1-14. DC ELECTRICAL AND CONTROL SYSTEM.
(See FO-1.)
a.
Introduction. The DC electrical and control
system's primary function is to enable the
starting, stopping and operation of the diesel
engine
under
a
variety
of
operating
conditions.
1-22
|
