TORQUE DATA

TM 5-6115-593-12 TO 35C2-3-463-1 NOTE: Contacts to be arranged per wiring diagrams. Time Delay Relay Manufacturer ...................Agastat Division of Amerace Corp. Part number.....................7012AH Voltage ............................120V AC, 50/60 Hz Type ................................Time delay on energize adjustable, 3 to 30 min. Contacts ..........................DPDT Time Delay Relay Manufacturer ..................Agastat Division of Amerace Corp. Part number ....................70220K Voltage ...........................24V DC Type ................................Time delay on de- energize, adjust- able, 5 min. Contacts .........................DPDT Time Delay Relay Manufacturer ...................Westinghouse Electric Corp. Part number.....................ARPT-20 Type ................................Mechanical Contacts .........................1-NO, 1-NC p. Fuel System Diagram. See figure 1-8 for the generator set fuel system diagram. q. Instruction Plate Information. The generator set has instruction plates located throughout the set. See Figure 1-9 for the location of the plates. The document compartment contains lamination of all instruction plates. On unhoused sets, several of the plates can be found only in the document compartment. r. Schematics and Wiring Diagrams. FO-1 through FO-16 are the schematic and wiring diagrams for the generator set major components and auxiliary equipment. 1-11. TORQUE DATA. Torque data applicable to operator/crew and organizational maintenance is given in Table 1-1. 1-12. DIFFERENCE BETWEEN MODELS. Differences between generator sets are delineated in the Repair Parts and Tools List, TM5-6115-593-24P, Intermediate (Field) (Direct and General Support) and Depot Level Maintenance TM5-6115-593-34, and in this manual. NOTE Throughout this technical manual MEP- 029A is referred to as code A and MEP- 029B is referred to as Code B. 1-19