Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: Table 2-3. Troubleshooting (Cont)
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 

Back
Table  2-3.  Troubleshooting
Up
TM-5-6115-585-34 Generator Set Diesel Engine Driven Tactical Skid Mtd 5 KW 1 Phase 2 Wire 1 Phase-3 Wire 3 Phase-4 Wire 120 120/240 and 120/208 Volts Manual
Next
Table  2-3.  Troubleshooting  (Cont)

TM5-6115-585-34 NAVFAC   P-8-262-12 TO-35C2-3-455-2 TM-05684C-34 Table   2-3.   Troubleshooting   (Cont) MALFUNCTION TEST OR INSPECTION CORRECTIVE   ACTION 4. STARTER WILL NOT ENGAGE FLYWHEEL. Step  1.  Check  starter  clutch  (bendix)  and  pinion  (paragraph  5-2). Repair  or  replace  as  necessary. Step  2.  Check  for  damaged  ring  gear  (paragraph  7-4). Replace   ring   gear   if   necessary. 5. ENGINE WILL NOT START WHEN CRANKED. Step  1.  Check  for  faulty  injection  caused  by  dirty  fuel. Replace   with   clean   fuel.   Service   fuel   filters.   Clean   and   if   necessary   repair   or replace   fuel   injection   nozzle   (paragraph   7-20). Step  2.  Check  for  poor  compression. See  malfunction  14. Step   3.   Incorrect   timing. Retime   engine   (paragraph   7-18). 6.  ENGINE  MISFIRES. Step 1. Step 2. Step 3. Step 4. Check   for   poor   compression. See   malfunction   14. Check   for   defective   or   dirty   injection   nozzles   (paragraph   7-20). Clean   or   replace   nozzles. Check  for  broken  valve  spring  (paragraph  7-9). Replace   broken   springs. Check  cylinder  head  assembly  for  build-up  of  carbon  (paragraph  7-9). Clean   carbon   from   cylinder   head   assembly. 7. LOW ENGINE POWER. Step  1.  Check  for  poor  compression. See  malfunction  14. Step  2.  Check  for  incorrect  timing, Adjust   injection   timing   if   necessary   (paragraph   7-18). 8.  LOW  OIL  PRESSURE. Step  1.  Check  to  see  if  oil  by-pass  is  stuck  open  (paragraph  7-13). Clean  or  replace  oil  by-pass  valve  and  spring. 2-7

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing