|
| |
Back
TM-5-6115-585-12_60 | Up
TM-5-6115-585-12 Generator Set Diesel Engine Driven Tactical Skid Mtd 5 KW 1 Phase 2 Wire 1 Phase-3 Wire 3 Phase-4 Wire 120 120/240 and 120/208 Volts Manual | Next
TM-5-6115-585-12_62 |
TM5-6115-585-12
NAVFAC P-8-623-12
TO-35C2-3-455-1
TM-05684C/05685B-12
a. When starting a set with a dry fuel system or after a
filter drain or change:
(1) Push In DC circuit breaker.
(2) Make sure the vent on the underside of the fuel
filler cap is open.
(3) On ASK equipped generators, open air Intake door,
(4) To prime fuel lines, slightly open plug (1, fig. 4-9)
on head (8) on filter assembly nearest check valve (6,
fig. 4-11).
(5) Move master switch to PRIME& RUN.
(6) When pump slows down, and no more bubbles
appear around plug, tighten plug (1, fig. 4-9).
NOTE
Preheat is not required when engine is
warm.
b. Move master switch to PREHEAT position and hold
for one minute.
2-2
Change 8
|
