Figure 3-23. Battery and Frame

TM 5-6115-584-12 NAVFAC P-8-622-12 TO-35C2-3-456-1 TM-05682C-12 Inspect to see that there is no dirt or oil underneath lens in- dicating that gauge is no longer properly sealed. Check to see that pointer is not bent or damaged. Check that markings on gauge are readable. Check to see that meter is fastened secure- ly to engine. h. Flexible Oil Lines (see figure 1-1). Inspect flexible oil lines to the oil pressure gauge and the oil cooler for physical damage. Check for leaks especially around fittings. i. Engine Stop Solenoid (see figure 3-22). Inspect stop solenoid (1) for dents or other physical damage. Check that solenoid is securely attached to cylinder shroud bottom pan with two screws (2) and lockwashers (3). Check that electrical connections (4) to solenoid are clean and tight. j. Oil Dip-Stick and Housing (see figure 1-1). In- spect oil dip-stick and housing (9) for physical dam- age. Check for leaks especially at gasket between Figure 3-23. Battery and Frame 3-26 Change 4