Figure 3-16. Speed Control Assembly

TM 5-6115-584-12 NAVFAC P-8-622-12 TO-35C2-3-456-1 TM-05682C-12^- 1. Knob 4. clamp 2. Nut 5 . N u t 3. support 6. Cotter pin 9. Engine backplate TS 6115-584-12/3-16 Figure 3-16. Speed Control Assembly 7. Clevis pin 8. Governor assembly 3-22. ENGINE COOLING SYSTEM. damage. Check that blower housing assembly is a. Inspect (see figure 3-17). On ASK equipped generators, properly secured to engine. With engine running inspection is limited to parts of shroud assembly visible through check for noise which would indicate blower wheel access doors. is rubbing against blower housing assembly or blower grille. (For units without ASK.) (1) Shroud Assembly. Inspect shroud assembly (11) and door panel (12) for dents or other physical damage. Inspect hinge attaching air housing panel (12) to see that it swings freely. Check to see that shroud assembly and door panel are properly secured to engine. (3) Blower Housing Grille Assembly. Inspect (2) Blower Housing Assembly. Inspect blower grille (29) for dents or other physical damage and housing assembly (32) for dents or other physical that grille is properly secured to engine. (For units without ASK.) Change 7 3-21