oiTable 1-1. Differences in Performance Characteristics

Table 1-1. Differences in Performance Characteristics 1. Voltage (a) (b) (c) (d) Dip with application of rated load. Rise with rejection of rated load. Dip or rise with appli- cation of simulated motor load. Adjustment range 2. Frequency (a) Regulation. (b) Short term steady state stability. (c) Long term steady state stability. (d) Undershoot with applica- tion of rated load. (e) Recovery after application of rated load. (f) Overshoot with rejection of rated load. (g) Recovery after rejection of rated load. (h) Drift (60° F change). (i) Adjustment range MEP006A 20% max. 20% max. 40% max. 50 Hz +2.5% -10% 60Hz +15% -5% 2 to 3% Within 2% bandwidth Within 3% bandwidth 3% max. Within 3 seconds 4% max. Within 3 seconds 1% 45-65 Hz (Manual) MEP105A 15% max. 15% max. 30% max. 50 Hz +2.5% -10% 60Hz +15% -5% Within ± 0. 25% Within 0.5% bandwidth Within 1% bandwidth 1.5% max. Within 1 second 1.5% max. Within 1 second 0.5% 50 Hz 48 to 52 Hz 60 Hz 58 to 62 Hz MEP115A 12% max. 12% max. 25% max. 400 Hz +10% -5% Within ±0.25% Within 0.5% bandwidth Within 1% bandwidth 1.5% max. Within 1 second 1.5% max. Within 1 second 0.5% 390 to 420 Hz 1-40