Figure 1-6, PU-h08/M truck mounted Stewart-Stevenson Model 54400DE; component location (Sheet 2 of 2).

5-6115-376-13

2330-205-20514 has been modified for use with the

(d)

Personnel

Platform. A

retractable

4 6 KW and 60 KW generator sets as follows:

personnel platform is mounted at rear of the

generator trailer frame, and provides access to

(a) Handbrake levers. T h e t w o h a n d b r a k e

c o n t r o l panel of the generator set (fig. 1-2(2)).

l e v e r s have been removed from under the gener-

a t o r trailer frame and mounted on the front step

(e)

Rear

landing

leg

assemblies. T w o

o f the fender assembly (fig. 12(1).

landing

legs are provided, one at each side of the

r e a r channel of the frame (fig. 2-4).

(b) Blackout tail and stoplight. T h e r i g h t

r e a r blanket tail and stoplight assembly has been

(2) C a r g o t r u c k ( P U - 4 0 8 / M , P U - 7 0 0 / M ) .

r e m o v e d and relocated to the right of its original

T h e truck mounted generator sets use the M54A2

l o c a t i o n (fig. 1-2 (2).

5 - T o n 6x6 cargo truck as described in TM 9-2320-

211-10, figures.

(c) Fender knit assembly. The fender kit

assembly

(FSN

6115-705-4001)

fitted

the

(3) Skid p l a t f o r m ( P U - 4 0 8 / M ) . T h e

skid

platform (MERDC drawing 13214E1435)

is a

generator trailer frame and provides platform

w o r k area for personnel and mounting facility for

light-weight assembly 166 inches long, 84 inches

power control and ancillary components (fig. 12

w i d e and 8 inches high, weighing 2600 pounds. It

(1).

p r o v i d e s mounting facilities for the diesel engine