GENERATOR SET, DIESEL ENGINE-DRIVEN, TACTICAL, SKID MTD, 15 KW, 3 PHASE, 4 WIRE, 120/208 AND 240/416 VOLTS

LO 9-6115-464-12

LUBRICATION ORDER

(Supersedes LO 5-6115-464-12,28 November 1990)

17 APRIL 1992

GENERATOR SET, DIESEL ENGINE-DRIVEN,

TACTICAL, SKID MTD, 15 KW, 3 PHASE, 4 WIRE,

120/208

AND

240/416

VOLTS

(DOD

MODEL

MEP-004A

6115-00-118-1241)

(DOD

MODEL

MEP-104A

6115-00-118-1245)

(DOD

MODEL

MEP-113A

6115-00-118-1244)

References: TM 5-6115-464-12 and C9100-IL

REPORTING

ERRORS

You can help improve this publication. If you find mistakes or if you know of a way to improve the

p r o c e d u r e s , please let us know. Your letter or DA Form 2028 (Recommended Changes to Publica-

tions and Blank Forms) should be mailed directly to: Commander, U.S. Army Troop Support

C o m m a n d , ATTN: AMSTR-MMTS, 4300 Goodfellow Blvd., St. Louis , MO63120- 1798. A

w i l l be furnished to you.

NOTES

This LO is for (C) Crew/Operator or Unit (O) maintenance. Lube intervals (on-condition or hard time) and

t a s k - h o u r times are based on normal hours of operation. Change the intervals if your lubricants are contaminated

o r if you are operating the equipment under adverse operating conditions. Lube more during constant use and less

d u r i n g inactive periods. Adequate preservation precautions must be taken during inactive periods.

WARNING

D r y cleaning solvent PD-680 Type II or equivalent used to clean parts is potentially dangerous to personnel and

p r o p e r t y . Avoid repeated and prolonged skin contact. Do not use near open flame or excessive heat. Flash point of

s o l v e n t is 100°F - 138°F

(38°C-60°C).

C l e a n parts with dry cleaning solvent PD-680 and dry before lubricating.

On-condition (OC) intervals for oil changes shall be determined by the Army Oil Analysis Program (AOAP)

l a b o r a t o r y and shall be applied unless otherwise notified.

H a r d time oil change intervals will be applied in the event AOAP laboratory support is not available.

B e f o r e you start your lube service:

NEVER

ALWAYS

a. Clean parts before lubricating.

a. Use wrong type/grade lubricant.

b . Use the lubrication order as your guide.

b. Use too much lubricant.

D I S T R I B U T I O N S T A T E M E N T A - Approved for public release; distribution is unlimited.

Card 1 of 4