LUBRICATION ORDER

-KEY-

EXPECTED TEMPERATURES

LUBRICANTS

CAPACITY

+40 F to -10° F 0° F to -65°F INTERVALS

Above +32° F

0° C

Intervals

+ 5° C to -23 C-180 C to -500 C

OE/HDO LUBRICATING OIL, Engine

given are

in hours of

normal

Crankcase

34-3/4 qt (33.02L)

operation.

Air Cleaners

11/2 qt. ea. (1.43L)

OE/HDO 30

OIE/HDO 10

OEA

Oil Can Points

OEA-OIL, Engine, Arctic

GAA-GREASE, Automotive and Artillery

ALL TEMPERATURES

NOTES:

Copy of this Lubrication Order will remain with the

equipment at all times; instructions contained herein are

1. FOR OPERATION OF EQUIPMENT IN

PROTRACTED COLD TEMPERATURES BELOW -10°.

mandatory.

(-23° c). Remove lubricants prescribed in the key for

temperatures above -10° F. (-23°

C). Clean parts

with SOLVENT, dry-cleaning. Relubricate with lubricants

specified in the key for temperatures below -10° F. (-23°

C).

2. OIL FILTERS. After installing new filter elements, fill

By Order of the Secretary of the Army:

crankcase, operate engine 5 minutes, check housings

for leaks, check crankcase oil level and bring to full

mark.

FRED C. WEYAND

General, United States Army

Chief of Staff

3. OIL CAN POINTS. Every 50 hours lubricate hinges,

latches, control linkages, and all exposed adjusting

threads with OE/HDO.

4. FAN BEARING. Remove both plugs, insert fitting,

lubricate until new grease extrudes from relief plug hole,

operate engine at slow idle speed 3 minutes, install both

plugs.

5. LUBRICANTS. The following is a list of lubricants

with the Military Symbols and applicable Specification

numbers.

Official:

OE/HDO

MIL-L-2104

PAUL T. SMITH

OEA

MI L-L-46167

Major General, United States Army

GAA

MIL-G-10924

The Adjutant General

Distribution: To be distributed in accordance with DA

From 12-25D, (qty rqr block no. 1065). Operator

* U.S. GOVERNMENT PRINTING OFFICE: 1995 0 -

maintenance requirements for Generator Sets, , Engine

386730 (21305)

Driven, 100 KW, 60HZ, Precise Power.

PIN: 020575-000