TM 5-3810-306-34
b. Install control rods (11) and (12) with clevis pins
f. Install fitting and connect air line (1) to automatic
(13) and (17), washers (15) and (16) and lock
control lever lockout (2).
pins (14).
4. CONNECT NEGATIVE BATTERY CABLE
AT
3. INSTALL
AUTOMATIC
CONTROL
LEVER
SHUNT. (REFER TO TM 5-3810-306-20.)
LOCKOUT CYLINDER (2).
5. TEST FOR PROPER OPERATION.
a. Place lockout cylinder (2) shaft through hole in
mounting bracket and secure with nut (9).
ADJUSTMENT:
b. Install locknut (8) and clevis (6) on lockout
1. ADJUST
AUTOMATIC
CONTROL
LEVER
cylinder (2) shaft.
LOCKOUT CYLINDER (2).
c. Align slotted hole in lockout shaft (7) with hole in
a. With control valves centered and lockout cylinder
clevis (6). Install clevis pin (4) and secure with
(2) fully extended, adjust clevis (10) until stops
two "E" clips (5).
on shaft (7) contact free rotating lugs (11) on
shaft.
d. Tighten clevis locknut (8).
2. INSTALL FRONT COVER ON CAB. (REFER TO
e. Remove tags
and
connect
two
electrical
TM 5-3810-306-20.)
connectors (3).
END OF TASK
12-12