TM 10-3930-675-24-2
ACCESSORY DRIVE ASSEMBLY MAINTENANCE - CONTINUED
0213 00
ASSEMBLY - CONTINUED
4.
Using accessory drive assembly tool, press shaft into gear until tool comes in contact with gear surface.
SHAFT
DRIVE GEAR
Remove tool and measure shaft as shown. If measurement is not within range, remove shaft from gear (refer to Disas-
5.
sembly, step 4) and repeat steps 1 thru 4.
40.94 +/-
0.03 MM
(1.612 +/-
0.001 IN.)
SHAFT POSITION MEASUREMENT
0213 00-10