TM 10-3930-675-24-2
CYLINDER HEAD REPAIR - CONTINUED
0200 00
ASSEMBLY - CONTINUED
8.
9.
Lubricate new injector sleeve O-ring (17) with oil and install O-ring in groove of injector sleeve bore.
O-RING GROOVE
17
10.
Position new injector sleeve (16) and install using injector sleeve driver.
11.
Remove injector sleeve driver and install injector sleeve holding tool. Tighten screw to 38 lb-ft (50 Nm).
12.
Reinstall injector sleeve driver and strike with mallet to seat injector sleeve (16). Retighten injector sleeve holding tool
screw as needed.
INJECTOR
SLEEVE
INSTALLER
INJECTOR
SLEEVE
HOLDER
16
0200 00-15