TM 10-3930-675-24-2
TRANSMISSION SENSORS REPLACEMENT - CONTINUED
0096 00
REMOVAL - CONTINUED
2.
Press in on connector retaining clip and disconnect electrical connector from sensor.
CONNECTOR
SENSOR
RETAINING
CLIP
CAUTION
Engine speed, internal gear speed, turbine speed, and output speed sensors are installed and posi-
tioned with spacers. Spacers are removed with their respective sensor and must be retained for instal-
lation. Failure to follow this caution may result in damage to equipment or improper sensor operation.
3.
Remove sensor and O-ring from transmission. Discard O-ring.
SENSOR
O-RING
0096 00-3