 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
(6) Remove six screws (11), valve block (2),
gasket (12), and bracket (13) from pump
housing (14). Discard gasket.
(7) Remove wafer plate (15), pin (16), and
piston (17) from valve block (2).
WARNING
Wear eye protection and use care
when removing retaining rings.
Retaining rings are under spring
tension and can act as projectiles
when released causing severe eye
injury.
(8) Remove retaining ring (18), rod (19), and
preformed packing (20) from valve block
(2). Discard preformed packing.
NOTE
Do step (9) if valve fails inspection.
(9) Remove seat (21), valve (22), and spring
(23) from valve block (2).
(10) Position valve block (2) in soft-jawed vise.
NOTE
When
removing
bearing
cup,
frequently reposition slide hammer
hook.
(11) Remove bearing cup (24) from valve block
(2).
(12) Remove plug (25) and preformed packing
(26) from valve block (2).
Discard
preformed packing.
27-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals