WARNING

TM 9-2320-312-24-2

WARNING

AIRBRAKE SYSTEM

· DO NOT disconnect any air lines or fittings unless engine is shut down and air system pressure is relieved.

Failure to follow this warning could result in serious injury to personnel.

· Brake chamber contains spring under great pressure. To prevent personnel injury, avoid working directly

behind chamber. If caging bolt will not engage properly, spring may be broken.

· DO NOT remove clamp ring around spring brake chamber. It is under tension and can cause personnel injury if

released.

WARNING

BATTERIES

· To avoid injury, eye protection and acid-resistant gloves must be worn when working around batteries. Do not

smoke, use open flame, make sparks or create other ignition sources around batteries. If a battery is giving off

gases, it can explode and cause injury to personnel. Remove all jewelry such as rings, ID tags, watches, and

bracelets. If jewelry or a tool contacts a battery terminal, a direct short will result in instant heating or electric

shock, damage to equipment, and injury to personnel.

· Sulfuric acid contained in batteries can cause serious burns. If battery corrosion or electrolyte makes contact

with skin, eyes or clothing, take immediate action to stop the corrosive burning effects. Failure to follow these

procedures may result in death or serious injury to personnel.

Eyes. Flush with cold water for no less than 15 minutes and seek medical attention immediately.

Skin. Flush with large amounts of cold water until all acid is removed. Seek medical attention as required.

Internal. If corrosion or electrolyte is ingested, drink large amounts of water or milk. Follow with milk of magnesia,

beaten egg or vegetable oil. Seek medical attention immediately.

Clothing/Equipment. Wash area with large amounts of cold water. Neutralize acid with baking soda or household

ammonia.

WARNING

CAB TILT SYSTEM

· Ensure that no part of body is under cab while tilting. Stand clear of front and rear of cab while it is being

raised. Ensure that tools and supplies are removed from cab and that cab doors are securely closed before tilting

cab. Failure to do so may result in injury to personnel.

· Always check that cab tilt safety prop is properly engaged before working under cab. Cab could fall and cause

serious injury or death.

· Ensure cab latch fully engages after lowering cab. If cab latch is not engaged, cab could tilt while in motion.

Failure to follow this warning may result in injury or death to personnel.