|
| |
Back
Hydraulic selector switch | Up
TM-9-2320-304-14P Truck Tractor Line Haul: 52 000 GCWR 6x4 M915A3 Manual | Next
LHS OVER LOAD indicator |
TM 9-2320-304-14&P
2-35
e. Off-Loading Flatrack/Forward Repair System in Manual Mode.
(1) Check for sufficient operating room at front and rear of truck. Check overhead clearance and
ground conditions.
(2) Apply service brake pedal (1) and set transmission range selector (2) to N (Neutral).
CAUTION
Manual mode is used mainly in event of a failure of automatic control electrical system and
when unloading an FRS. Greater care must be exercised during operation of manual mode
for correct cycle of events to occur, or damage to equipment may result.
(3) Put PTO ENGAGE switch (3) in ON position. Make sure indicator light (4) comes on.
(4) Turn hydraulic selector switch (5) to MAN H.A. position.
Change 1
|
