|
| |
Back (11) Set transmission range selector | Up TM-9-2320-304-14P Truck Tractor Line Haul: 52 000 GCWR 6x4 M915A3 Manual | Next d. Picking Up a Flatrack/Forward Repair System in Manual Mode |
TM 9-2320-304-14&P
2-25
Operating Instructions (Cont)
CAUTION
Never drive with LHS NO TRANSIT indicator illuminated. An illuminated indicator means
load locks are not engaged and LHS is not fully stowed.
NOTE
Hook arm does not need to be fully stowed if more transfer operations are going to be made.
(16) Move joystick (6) to LOAD position until LHS is in transit position. LHS NO TRANSIT
indicator (7) will go out indicating LHS is in transport position.
CAUTION
Engine speed must be at idle before using hydraulic selector switch, or damage to
equipment may result.
(17) Release joystick (6).
(18) Turn hydraulic selector switch (5) to OFF position.
(19) Put PTO ENGAGE switch (3) in OFF position. Make sure indicator light (4) goes off.
|