To fully view lift hook relation to hook bar

TM 9-2320-304-14&P 2-15 Operating Instructions (Cont) NOTE · To fully view lift hook relation to hook bar, it may be necessary to observe position from outside the cab. · LHS will only operate when transmission range selector is in N (Neutral). (7) Continue to unload until lift hook (8) has moved to below level of flatrack hook bar (2). (8) Release joystick (7). (9) Set the transmission range selector (1) to R (Reverse) and back truck up to flatrack, alining truck and flatrack as straight as possible with lift hook (8) to middle of hook bar (2) until lift hook (8) contacts hook bar (2). Be sure lift hook tip is positioned below bottom of hook bar (2). NOTE LHS will only operate when transmission range selector is in N (Neutral). (10) Set the transmission range selctor (1) to N (Neutral). CAUTION Do not use R (Reverse) to back up truck while hook arm is attached to flatrack or damage to LHS will occur. (11) Move the joystick (7) to LOAD position to raise lift hook (8) and engage hook bar (2).