 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
  TM 5-2420-224-34
Table 2-1. Troubleshooting (Cont)
Malfunction
Test or inspection
Corrective Action
FRONT LOADER (CONT)
n. Operate loader lift lever to check for smooth movement in all directions.
if movement is not smooth or float lock is not achieved, turn two socket
o.
head screws (7 and 2) either in or out to accomplish smooth movement
and proper float lock.
Hold two socket head screws (7 and 2) in place and tighten two jam
p.
nuts (6 and 1).
if problem continues, replace control valve (page 11-28).
Step 1. Check if control valve tie rod nuts (1) are too tight.
Tighten tie rod nut(s) to 16 ±2 lb-ft (32.5 ±2.7 N.m).
Step 2. Check for incorrectly adjusted detent.
Perform Malfunction 40.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals