HOW TO USE THIS MANUAL

TM 5-2420-224-20-1

HOW TO USE THIS MANUAL

This manual has an edge index that will help you find specific information in a hurry.

Simply spread the pages in the right edge of the manual until the printed blocks can be seen.

Open the manual where the block on the edge of the page lines up with your selected topic

printed in the front cover block.

OVERVIEW

This manual is organized by chapters, sections, and appendices. A summary of the

organization of this manual, by major divisions, follows:

Front cover index gives you a quick reference to chapters, sections, and appendices that

you will use often.

WARNINGS--All warnings you should observe while working on or around the SEE/HMMH

are shown in this part of the manual. These are repeated in the parts of the manual where they

apply.

Table of Contents--The contents of the chapters and appendices are listed here.

Chapter 1--This chapter contains general information about the SEE/HMMH. It also shows

and describes major components and lists specific data that you will find helpful while

performing maintenance tasks.

Chapter 2--This chapter describes services and inspections that must be performed at the

unit level, such as services you must perform upon receipt of the vehicle, preventive

maintenance checks and services, and lubrication instructions. Other sections contain painting

and restenciling of markings and general repair and cleaning methods.

Chapter 3--This chapter outlines troubleshooting of the SEE/HMMH and their systems. It

includes a troubleshooting index, by symptom and system, and procedures on how to use the

STE/ICE R components while troubleshooting.

Chapter 4--This chapter contains step-by-step instructions for doing the maintenance

tasks. Each system of the SEE/HMMH has its own section within the chapter, and any special

tools, equipment, or supplies you may need for a task are listed.

Appendix A--This appendix lists the technical manuals and other publications you may

have to refer to while working on the SEE/HMMH.

Appendix B--This appendix contains the Maintenance Allocation Chart (MAC) for the

SEE/HMMH.

Appendix C--This appendix lists the expendable supplies and materials you will need while

performing maintenance on the SEE/HMMH.

Appendix D--This appendix lists and describes any manufactured items you will need for

performing maintenance on the SEE/HMMH.

Appendix E--This appendix describes the proper method of tightening fasteners.

Index--The index is an alphabetical listing of the contents of this manual.

Back Cover--The inside back cover contains a metric conversion table.

xii

Change 2