 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM5-241O-237-34
FRONT ENGINE SUPPORT - REPLACE (Cont'd)
3-5.
(6) Use a wrench to remove two
capscrews (5) and washers (6)
that attach the engine rear
supports (7) at each side of the
flywheel housing.
(7) Check that the front hydraulic
jacks are firmly positioned
against the oil pan.
(8) Use
a wrench to remove capscrews
(8)
and washers (9) to attach
the
engine front support (4) to
the
trunnion.
(9) Turn the engine front support
clockwise (as seen from the front
of the engine) and remove it from
the engine.
b.
Installation
(1) Install engine front support (4)
in position on the trunnion.
(2) Install capscrews (8) and washer
(9).
(3) Use a torque wrench to tighten
capscrews (8) to a torque of
75+10 lb. ft.
(4) Slowly lower jacks under the oil
pan until engine front support
(4) is resting on the frame.
3-19
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals