 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
  TM5-241O-237-34
WARNING
WARNING
Hydraulic oil, under pressure
Personal injury and equipment
that can be higher than 2500
damage can result when
disconnecting lines to install
psi, can remain in the
hydraulic system on this
flow blocking devices, caps, or
tractor after the engine and
plugs. The blade and ripper can
move and pressure oil can be
pump have been stopped. Serious
released. (page 13-118)
injury can be caused if this
pressure is not released before
any service or test is done on
the hydraulic system. To
prevent possible injury, be
WARNING
sure that the pressure in the
To prevent personal injury
system is released before any
while checking pressures,
fitting, hose, or component is
disconnect and remove cable
loosened, tightened, removed,
from drum. (page 13-126)
or adjusted. When possible,
the blade and ripper must
always be completely lowered to
the ground before service is
started. When it is necessary
for the blade and/or ripper to
be raised while tests or
adjustments are done, be sure
that it has the correct
support. Always move the
tractor to a location away from
the travel of other machines.
Be sure that other personnel
are not near the tractor when
the engine is running and tests
or adjustments are being made.
WARNING
Do not install hydraulic
circuit tester to the pump
supply line with the engine
running. Oil could be hot and
under pressure, and cause
serious personal injury.
xi
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals