 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
  TM5-241O-237-34
WARNING
WARNING
Hydraulic oil in the system can
Use insulated gloves for handling
hot and cold parts to avoid
be under pressures over 2500
personal injury. (page 9-62)
psi with the engine and pump
OFF. ALWAYS relieve pressure
in hydraulic lines before
attempting to remove any
WARNING
component in the hydraulic
system. With engine OFF and
Plunger assembly, lever arm, and
hydraulic attachments on the
cover are under spring pressure.
ground, move control levers
through all operating position
Use caution when removing these
several times to relieve line
parts to prevent personal injury
pressure. Relieve pressure in
or damaged or lost parts. (page
hydraulic oil tank, by
loosening filler cap very
slowly. Failure to follow
these precautions could result
WARNING
in serious personal injury.
Do not disturb capscrew
holding plunger assembly until
lever and cover assemblies are
in place. Spring pressure
WARNING
behind plunger could cause
injury or lost parts. (page
Spool and lever housings are
spring loaded. Separate
housings carefully to prevent
personal injury or parts
damage. (page 10-62)
WARNING
Turn battery disconnect switch
to OFF before working inside
WARNING
dash assembly. Failure to
follow this precaution could
Capscrew and washers are under
result in personal injury and
spring pressure. Remove carefully
damage to equipment. (page
to prevent personal injury or
parts damage. (page 10-63)
WARNING
Take necessary precautions to
insure adequate personal safety
while welding on or around the
frame. Use caution while welding
near hydraulic and fuel lines;
personal injury or death could
result. See TM9-273 for proper
welding procedures. (page 11-2)
ix
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals