 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
  TM5-241O-237-34
SAFETY SUMMARY
The following warnings appear in the text in the manual and are repeated
here for emphasis.
WARNING
WARNING
Reinstall large nut on pinion
If the valve spring lock is not
correctly installed on the valve
shaft after capscrew and lock
have been removed. Because the
stem, it will unseat and be
thrown with force when the
flange is installed on pinion
shaft with force of 35 to 40
spring compressor is released.
The thrown lock could cause
tons, nut will prevent flange
from coming off and causing
serious personal injury. (page
personal injury. (page 8-13)
WARNING
WARNING
The adjuster cylinder for the
Be certain that the crankshaft is
track is under high hydraulic
secured properly to a floor jack
pressure. Do not visually
before removal of the last two
inspect the relief valve to
bearing caps. Failure to follow
see if grease is released when
these instructions could cause
it is open. Look to see that
personal injury. (page 3-44)
the track has loosened. Use
this warning any time the
tracks are loosened or
tightened. (page 8-28)
WARNING
The oil pump idler gear is free
to fall when the oil pump is
WARNING
removed. (page 3-112)
When removing the equalizer bar,
make sure all jacks and
blocking are properly placed
WARNING
and secure to prevent movement
of tractor before starting
Fuel transfer pump cover is
removal procedure. Failure to
under spring tension. Use
follow this precaution could
caution when removing. (page 4-11)
result in serious or even
fatal injuries. (page 9-6)
vii
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals