 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
TRACK ROLLER GUARDS REPLACEMENT - CONTINUED
0162 001.
INSTALLATION
NOTE
Apply antiseize components to all guard mounting bolts and capscrews before installation.
1.
Position inner guard (10) on track roller frame and loosely install six capscrews (8) and spacers (9).
2.
Insert five rods (7) through inner guard (10) with nut (11) and new lockwasher (12) loosely installed on each rod.
3.
Place spacers (13) over rods (7).
4.
Position outer guard (4) on track roller frame and loosely install five capscrews (8) and spacers (9).
5.
Feed rods (7) through outer guard (4).
6.
Loosely install five new lockwashers (6) and nuts (5) on rods (7) on outer guard side.
7.
Tighten capscrews (8) on both outer and inner guards (4 and 10) to 500 lb-ft (678 Nm).
8.
Tighten nuts (5 and 11) on rods (7) to 265 lb-ft (359 Nm).
9.
Install retainer (3) at forward end of inner guard (10) with two bolts (1) and new lockwashers (2).
10.
Install retainer (3) at each end of outer guard (4) with two bolts (1) and new lockwashers (2).
END OF WORK PACKAGE
0162 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals