 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
  TM 5-2410-237-23
6.
Chapter 4 covers general maintenance information work packages. Before performing any maintenance procedure, read
and understand the instructions in this chapter.
6.1. Chapter 4.1 covers sustainment maintenance instructions.
7.
Chapter 5 includes Supporting Information: References; Maintenance Allocation Chart (MAC) Introduction; Mainte-
nance Allocation Chart (MAC); Expendable and Durable Items List; Tool Identification List; and Warranty Information.
FEATURES OF THIS MANUAL
1.
WARNINGs, CAUTIONs, NOTEs, subject headings, and other important information are highlighted in BOLD print as a
visual aid.
WARNING
A WARNING indicates a hazard which may result in death or serious injury.
CAUTION
A CAUTION is a reminder of safety practices or directs attention to usage practices that may result in
damage to equipment.
NOTE
A NOTE is a statement containing information that will make the procedures easier to perform.
2.
Statements and words of particular interest may be printed in CAPITAL LETTERS to create emphasis.
3.
Within a procedural step, reference may be made to another work package in this manual or to another manual. These ref-
erences indicate where you should look for more complete information.
If you are told: "Replace engine oil filter (WP 0011 00)", go to Work Package 0011 00 in this manual for instructions on
replacing the filter.
4.
Illustrations are placed after, and as close to, the procedural steps to which they apply. Callouts placed on the art may be
text or numbers, or both; whichever method is easier for the soldier.
5.
Numbers located at lower right corner of art (e.g. 387-001; 387-002, etc.) are art control numbers and are used for tracking
purposes. Disregard these numbers.
6.
Dashed leader lines used in the Lubrication Chart (WP 0009 00) indicate lubrication points that are located on both sides
of the equipment.
7.
Technical instructions include metric units as well as standard units. For your reference, a Metric Conversion Chart is
located on the inside back cover of the manual.
8.
The initial setup of each work package lists components necessary to perform the procedure. The number in parenthesis
following the component references the callout number for the component within the work package art.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals