| ||||||||||
|
|
![]() ![]() TM 5-2410-237-23
WARNING
HEARING PROTECTION
Your hearing can be PERMANENTLY DAMAGED if you are exposed to constant high noise levels of 85
DB or greater. Hearing protection is required when operating machine or when working on machine while
it is operating. Failure to wear hearing protection may result in hearing loss.
WARNING
HOT COMPONENTS
Hot oil or metal parts can cause severe burns. Wear insulated gloves, long sleeves and eye protection when
working with heated parts.
WARNING
HYDRAULIC SYSTEM PRESSURE
·
Do NOT remove hydraulic tank filler cap or disconnect or remove any hydraulic system line or fitting
unless hydraulic system pressure has been relieved. Hydraulic system pressure can be over 2500 psi
(17,237 kPa), even with engine and pump OFF. To relieve pressure, lower all hydraulic attachments to
the ground and shut down engine. Move control levers through all operating positions, then SLOWLY
loosen hydraulic tank filler cap. After maintenance, tighten all connections before applying pressure.
Escaping hydraulic fluid under pressure can penetrate the skin, causing serious injury or death.
·
At operating temperature hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting any
hydraulics. Failure to do so could result in injury.
WARNING
LIFTING HEAVY PARTS
· Lifting equipment used for lifting machine must be in good condition and of suitable load capacity. Failure to
follow this warning may result in injury or death to personnel and damage to equipment.
· Improper use of lifting equipment and improper attachment to machine can result in serious personnel injury
and equipment damage. Observe all standard rules of safety.
· Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
f
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |