|
| |
TM5-2410-237-10
2-11. STOPPING THE ENGINE.
After the machine has been working, operate at low idle for 5 minutes
before stopping the engine. This will allow hot areas to cool gradually,
and the turbocharger to slow down. This will extend the life of the engine
and turbocharger.
a. Push governor control lever past detent
to stop engine. When engine stops, turn
start switch to off.
Never turn disconnect switch OFF when the engine is running. Serious
damage to the electrical system will result.
b. Turn disconnect switch off.
2-12. BULLDOZER BLADE LIFT, TILT, AND TIP.
NOTE
The engine must be running to operate the hydraulic implements on the
tractor.
a. Move blade control lever (1) backward to
raise the blade.
2-28
|
