|
| |
TM5-2410-237-10
1-19. RIPPER HYDRAULIC SYSTEM.
RIPPER CONTROL VALVE. This valve is connected mechanically to the ripper control lever. This
valve directs the flow of pressure oil to the cylinders in response to the movement of the ripper control
lever.
LIFT CYLINDERS. These are two cylinders which are controlled by the ripper control lever. When the
lever is moved to the left, pressure oil causes the cylinders to extend and lift the ripper. When the lever
is moved to the right, the cylinders retract and lower the ripper.
HYDRAULIC TANK. This is the reservoir for the oil which controls the movement of the ripper and
bulldozer hydraulic cylinders.
1-14
|
